Choc to MX Keycap Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ZSA Voyager-themed Choc to MX keycap adapter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A small 3D-printable adapter to use MX keycaps on Choc switches. I tried out this Choc-MX Direct Adapter by DodgerX, and I liked it, but I decided to rebuild it and put a little ZSA-Voyager spin on the design. You can use the tips of the paper airplane to help install and remove the adapters.
If you have an MX keycap set you really want to use with the Voyager, now you can! Here are a few examples:
A bare Voyager with just the adapters
The Voyager with DSA Milkshake keycaps
The Voyager with Astrolokeys keycaps
The Voyager with DSA Nature Witch keycaps
Printed on the Bambu Labs X1C with mostly default, 0.2mm layer height settings. The tolerances are meant to be fairly tight, so I suggest printing a couple of test adapters to make sure the design works with your printer first.
Use tree supports with 0.22mm gap for relatively easy removal.
Enjoy!