Autel Evo 2 Mapir Survey3 Cameras and light sensor support and Scan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model was desgined to mount the survey system before the MAPIR bundle for the Autel EVO 2
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
3D printing, i designed it with some clearances in order to add some kind of dampening to not scratch the drone, i would use some double-sided tape without taking the other side. Use m3 heat inserts, and 18mm m3 bolts, for the cameras its designed for m3 as well but for 7 mm bolts. I recommend using composites or sls for printing the parts.
The same publication is on cults3d if you want and can to collaborate with something. I also provided the scan i made of the drone to make this parts. https://cults3d.com/en/3d-model/tool/autel-evo-2-mapir-survey-cameras-and-light-sensor-support