Autel Evo 2 Mapir Survey3 Cameras and light sensor support and Scan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model was desgined to mount the survey system before the MAPIR bundle for the Autel EVO 2
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 49
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
3D printing, i designed it with some clearances in order to add some kind of dampening to not scratch the drone, i would use some double-sided tape without taking the other side. Use m3 heat inserts, and 18mm m3 bolts, for the cameras its designed for m3 as well but for 7 mm bolts. I recommend using composites or sls for printing the parts.
The same publication is on cults3d if you want and can to collaborate with something. I also provided the scan i made of the drone to make this parts. https://cults3d.com/en/3d-model/tool/autel-evo-2-mapir-survey-cameras-and-light-sensor-support