Disc detainer lock core
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Disc detainer lock core created to better visualize how the lock works on the inside.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I made this model for our lockpicking group - https://t.me/autopsy_wt - to better show and explain how disc detainer locks work on the inside during lockpicking villages we organize.
The model discs use a standard rectangular key, but are based on Abloy Classic discs, so there are six possible positions ranging from 0 to 90 degrees in 18 degree increments. The classic discs are labeled 1 to 6 from 90 to 0 degrees, although only 3 different types of disks are needed as you can get an opposing one simply by mirroring it (1 turns into 6, 2 into 5, 3 into 4).
The provided key's code is 1-4-3-2-2-1, so you need to print two pieces of each disc and align them accordingly.
Also, if you have an AMS, you can print a logo that fits in the hole of the lock body simply as a pressed-in part. Our model has it :)
If you want to somehow modify the model - the step files are provided.
Material used: PLA
Printing notes:
use appropriate XY compensation settings, as no gap was used between parts during modeling to simplify it
the dimensions were also based on Abloy Classic, so print in 300% scale for a better visualization
print the retaining washer in the same 300% XY scale, but use less than 250% Z scale as due to supports in lock body, fitment issues will arise
if the disc stack doesn't fit, resize the height of spacers and reprint them to waste less plastic