Disc detainer lock core
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Disc detainer lock core created to better visualize how the lock works on the inside.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 50
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
I made this model for our lockpicking group - https://t.me/autopsy_wt - to better show and explain how disc detainer locks work on the inside during lockpicking villages we organize.
The model discs use a standard rectangular key, but are based on Abloy Classic discs, so there are six possible positions ranging from 0 to 90 degrees in 18 degree increments. The classic discs are labeled 1 to 6 from 90 to 0 degrees, although only 3 different types of disks are needed as you can get an opposing one simply by mirroring it (1 turns into 6, 2 into 5, 3 into 4).
The provided key's code is 1-4-3-2-2-1, so you need to print two pieces of each disc and align them accordingly.
Also, if you have an AMS, you can print a logo that fits in the hole of the lock body simply as a pressed-in part. Our model has it :)
If you want to somehow modify the model - the step files are provided.
Material used: PLA
Printing notes:
use appropriate XY compensation settings, as no gap was used between parts during modeling to simplify it
the dimensions were also based on Abloy Classic, so print in 300% scale for a better visualization
print the retaining washer in the same 300% XY scale, but use less than 250% Z scale as due to supports in lock body, fitment issues will arise
if the disc stack doesn't fit, resize the height of spacers and reprint them to waste less plastic