1 / 2
Christmas Tree Ornament - Family of Four — zdjęcie 1
1 / 2

Christmas Tree Ornament - Family of Four

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,78 € – 2,18 € netto (bez VAT)

Dla pliku: TreeOrnamentFamilyof4_v2_0.4n_0.2mm_PLA_MK4IS_1h32m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,98 € netto (środek widełek).

Masa podana przez autora
34 g
Czas druku podany przez autora
1,54 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Christmas Tree Ornament - Family of Four

Ocena
0 / 5
Polubienia
27
Pobrania
185
Wydruki
0
Wyświetlenia
462
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Design Concept

The Christmas Tree Ornament - Family of Four captures the essence of family during the festive season with a simple yet elegant design featuring four stylized figures under a star. Its round composition signifies unity and completeness.

Purpose

This model is perfect as a decorative piece for adding a personal touch to your Christmas tree. It represents a sense of togetherness and celebration.

Print Recommendations

Utilize a high-quality white PLA or resin material to maintain the subtle texture visible in the design. Printing with a layer height of 0.1 mm will enhance the finer details of the sculpture.

Assembly Instructions

Post-printing, attach a string or hook to hang the ornament. Ensure that the ornament is balanced correctly on its hook for upright display.

I printed in PLA

  • Infill: 15%

  • Layer Height: 0.20mm

  • Brim: No

  • Supports: Yes, on build plate only

  • Seams: Random

If you like my work consider

Buy me a coffee 😊

Tagi