1 / 2

Modular Spiral Egg Tower

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stores about 24 eggs in the depicted version with 2 segments taking advantage of vertical space.

Aktualizacja u źródła: 11 gru 2025

Informacje o modelu

I made this model for my Wife and wanted to have a modular solution that saves some space and looks nice too.

UPDATE:

Added a shorter 1/2 and 1/4 height segments for more possible configurations.

printing instructions:

no supports

PLA

25% infil

3 walls and

1.2 mm top and bottom thickness

.2 layer height with .4mm nozzle at 200C

bed 60C

adhesion brim

after printing insert 8x3 mm Neodymium disk magnets

designed with a slight interference but recommend using some super glue for good measure.

i flipped the polarity at one position compared to the other 2 so that it only fits in the proper orientation. However, that's not necessary.

magnets used: