Modular Spiral Egg Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stores about 24 eggs in the depicted version with 2 segments taking advantage of vertical space.
- Rating
- 5 / 5
- Likes
- 463
- Downloads
- 723
- Makes
- 4
- Views
- 5,729
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I made this model for my Wife and wanted to have a modular solution that saves some space and looks nice too.
UPDATE:
Added a shorter 1/2 and 1/4 height segments for more possible configurations.
printing instructions:
no supports
PLA
25% infil
3 walls and
1.2 mm top and bottom thickness
.2 layer height with .4mm nozzle at 200C
bed 60C
adhesion brim
after printing insert 8x3 mm Neodymium disk magnets
designed with a slight interference but recommend using some super glue for good measure.
i flipped the polarity at one position compared to the other 2 so that it only fits in the proper orientation. However, that's not necessary.
magnets used:
https://www.amazon.com/dp/B0CDGYTLH6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_8&th=1