Polybar mountings for Qube series cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have your rythm game controller at your reach with these mounting pieces!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You never know when you will need to rock on!
The Polybar is an amazing project that facilitates 3d printed guitar controllers for games like the Rock Band and Guitar Hero series.
This collection of mounts is made to make it easier to keep your controller at your reach with mounting points that attach to the FreeForm 2.0 mounting points on the Qube series of cases from Cooler Master! Using attachments that are only possible due to the open design of Cooler Master's cases.
Printing
If you have a Mini or Max Polybar controller with no housing parts, you should print one of the "Base" and one of the Holder pieces. Attach them to the case using the mounting holes and you are done! See the cover photo and the controller in the front of the case for reference.
If you are rocking a controller with housing parts, you may use the "LugPin Holder" to make it possible to attach your guitar to the case using the pins that normally are meant for using a strap. Print 2 "LugPin Holder" and then place them anywhere you want in the case, you should be able to rest the guitar in any sort of position in the case in this manner!
The 3mf file has everything you need to print, and the step file for the project has also been provided!