Splashproof Rugged Snap-Fit SD Card Storage Box | No Parts Needed | Supportless
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Splashproof Rugged Snap-Fit SD Card Storage Box. No Extra Parts needed, How Waterproof it is depends on how you print it
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Splashproof Rugged SD Card Storage Box.
No Extra Parts needed to assemble, Prints in Place except one the Latch, which you need to Snap in.
Make Sure to Print the Seal out of TPU and place it in in order to make the box Splashproof!
Im not responsible if your SD Cards get wet, its supposed to be Splashproof, but that depends on how well you print it.
Print the Main Box out of PETG, not PLA which deforms over time, and cracks easily.
Print Settings:
25% Infill
5 Top and Bottom Layers
3 Perimeters
0.2 Layer Height
No Supports
No Brim