Creality Falcon 2 Pro Exhaust Vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exhaust vent for Falcon 2 Pro hose and other exhausts that use similar size hose
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a through-wall exhaust vent that fits the hose used on Creality Falcon2 Pro (~65mm ID)
Fits a ~2.5"-3.5" hole while still sealing. Gaskets are to be printed in TPU and you'll need one for the interior and one for the exterior.
Just make sure it's centered well enough before drilling your 5mm holes in your material.
Hardware:
4x M5 Nuts
4x M5x25 bolts for 1/2 wood
If using different thickness material, add 12mm to your thickness for bolt length.
Printing settings:
Should would with most materials but I'd recommend something outdoor stable like ASA.
15 infill
3 perimeters
4-5 top and bottom layers.
The gaskets end get getting printed solid.