Supermicro Xeon-D2100 to Noctua NH-L12S mounting brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting brackets for FCBGA 2518 socket
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Brackets for convenient mounting of the Noctua NH-L12S to FCBGA 2518 sockets. Created and tested for the Supermicro X11SDV-4C-TLN2F motherboard.
You must print two - left & right are identical. You must use ABS or PC for print. DON'T USE PLA OR PETG.
The following are required for installation:
4 * DIN562 thin square M3 nuts – the brackets have slots for them
4 * M3*16mm flat head screws. Ideally with partial threading.
Installation process:
Insert the nuts into the slots – adjust their position using a flat-head screwdriver.
Remove the standard mounting hardware from the heatsink and install the brackets.
If using a fully-threaded screws, remove the threads from the top third (near the head) so the screw can rotate freely in the motherboard's hole.
Screw the 4 screws into the motherboard, place the heatsink onto them, and tighten (cross pattern corner to corner) until the heatsink is firmly seated.