1 / 3
Supermicro Xeon-D2100 to Noctua NH-L12S mounting brackets — image 1
1 / 3

Supermicro Xeon-D2100 to Noctua NH-L12S mounting brackets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mounting brackets for FCBGA 2518 socket

Rating
0 / 5
Likes
3
Downloads
4
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

Brackets for convenient mounting of the Noctua NH-L12S to FCBGA 2518 sockets. Created and tested for the Supermicro X11SDV-4C-TLN2F motherboard.

You must print two - left & right are identical. You must use ABS or PC for print. DON'T USE PLA OR PETG.

The following are required for installation:

  1. 4 * DIN562 thin square M3 nuts – the brackets have slots for them

  2. 4 * M3*16mm flat head screws. Ideally with partial threading.

Installation process:

  1. Insert the nuts into the slots – adjust their position using a flat-head screwdriver.

  2. Remove the standard mounting hardware from the heatsink and install the brackets.

  3. If using a fully-threaded screws, remove the threads from the top third (near the head) so the screw can rotate freely in the motherboard's hole.

  4. Screw the 4 screws into the motherboard, place the heatsink onto them, and tighten (cross pattern corner to corner) until the heatsink is firmly seated.

Tags