Milwaukee Circular Saw Dust Port Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dust cover to block the dust exhaust port for Milwaukee M18 rear handle circular saws.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 670
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Don't want your eyes to be sprayed with wood dust? What a concept.
The Milwaukee M18 Rear Handle Circular Saw is great, other than the location of the dust port. Rather than trying to temporarily fix the problem with tape and having to replace it when it falls off or you want to attach a vaccuum to it, just put a dust cover on it.
Note
Designed based off Milwaukee M18 FUEL™ Rear Handle 7-1/4" Circular Saw (2830-20)
Should fit Milwaukee M18 2631-20 and Milwaukee M18 2730-20 as well (UNTESTED).
Dust may build up and should be emptied often when using the dust cover.
Printing Recommendations
Use supports, some of the surfaces are unsupported 90 degree overhands.
Recommend printing in PETG, ASA, ABS, or some other filament with both toughness and uv-resistance. In PLA it may be unable to take the abuse
I couldn't find a freely available model so I decided to model it myself. Everything being both angled and curved made things quite tricky, ending up having to just sketch in 3D space and loft between surfaces. The geometry of the model is not clean or nice but is good enough to work.