Tormach XSTech Monitor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monitor mount for the included XSTech PathPilot monitor. Uses 33mm/1.3" OD PVC and included hardware.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Monitor mount for the Tormach XSTech PathPilot monitor. I'm pretty sure it's just a standard VESA mount or something, as the holes' centers are 100mm apart, but this worked for what I needed. The back mounts to some 33mm/1.3" OD PVC pipe because I needed a swivel, but the hole is oversize in order to use the “put tape around the pipe until it fits” method.
Make sure you print it in a smarter orientation than I did, that being with the big ol hole facing up and minimal supports on the bottom. It should already be oriented like that anyways but check just in case. Print with like 3 or 4 walls and a decent bit of infill - you don't want that thing falling.