1 / 4
Tormach XSTech Monitor Mount — image 1
1 / 4

Tormach XSTech Monitor Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Monitor mount for the included XSTech PathPilot monitor. Uses 33mm/1.3" OD PVC and included hardware.

Rating
0 / 5
Likes
1
Downloads
17
Makes
0
Views
378
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Monitor mount for the Tormach XSTech PathPilot monitor. I'm pretty sure it's just a standard VESA mount or something, as the holes' centers are 100mm apart, but this worked for what I needed. The back mounts to some 33mm/1.3" OD PVC pipe because I needed a swivel, but the hole is oversize in order to use the “put tape around the pipe until it fits” method. 

 

Make sure you print it in a smarter orientation than I did, that being with the big ol hole facing up and minimal supports on the bottom. It should already be oriented like that anyways but check just in case. Print with like 3 or 4 walls and a decent bit of infill - you don't want that thing falling. 

Tags