P
PrintablesMavric
Tormach BT30 tool tag
Tool tag for BT30 tool holders for easy identification. Print Settings Printer: Prusa Resolution: 0.250 Infill: 25% Category: Tools
- Downloads
- 290
- Likes
- 21
- Rating
- 0
Search results: tormach
48 models
P
PrintableshalcyOnSC
Tormach Coolant Ring
Coolant ring I made for the 770M. Has been working for me so figured I'd share. With the upgraded 1/4hp coolant pump and ½" coolant lines, you get pretty good coolant pressure and flow. Three holes for #10 screws to secure it to the…
- Downloads
- 168
- Likes
- 12
- Rating
- 0
P
PrintablesMavric
Tormach BT30 tool tag holder
BT30 tool tag holder. Print Settings Printer: Prusa Supports: Doesn't Matter Resolution: 0.250 Infill: 25% Notes: Use 1/8" x 1/2" magnets for the back of the holder Category: Tools
- Downloads
- 142
- Likes
- 14
- Rating
- 0
P
PrintablesHenryhbk
TTS Passive Probe holder for Tormach 440 add-on
So if you own the Tormach PCNC 440 and the TTS passive probe, you know it's kind of a pain to hookup/disconnect between uses. Since it plugs in you have a cord from the back right of the enclosure to your probe making it very awkward to…
- Downloads
- 108
- Likes
- 3
- Rating
- 0
P
PrintablesTheWylieStCoyote
Tormach TTS tool holder tray
Tray to hold Tormach TTS tool holders. PETG is probably the best material.
- Downloads
- 83
- Likes
- 6
- Rating
- 0
P
Printablesfaloway
Tormach CNC Pendant Holder / Shuttle Express Control Holder
This is a holder for the pendant that controls many of the Tormach CNC machines, such as the 15L Slant Pro, and the Tormach 1100 PCNC. Also fits the Shuttle Express branded multimedia controller. I was tired of the pendant constantly…
- Downloads
- 53
- Likes
- 1
- Rating
- 0
P
PrintablesPaul B
Holder for a Tormach Jog Shuttle Controller
I printed this in PETG for strength and flexibility. In my particular situation, the bracket holds the controller at 20 degrees. Also if this is mounted in a flat surface the holder part would crash into the wall it is mounted to. To deal…
- Downloads
- 49
- Likes
- 3
- Rating
- 0
P
PrintablesTheWylieStCoyote
Tormach 440 Coolant drain to 1-1/2" PVC tubing
Coolant drain for tormach 440 factory coolant pan to 1-1/2" PVC tubing.
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
Printablescaveduck
Tormach TTS holder rack, 4x4
A beefy 4x4 rack for Tormach TTS mill tool holders. The holes are on 2.0" centers, with margins set so that you can glue or bolt multiple racks together while maintaining uniform spacing. This spacing will accommodate some good-sized…
- Downloads
- 42
- Likes
- 3
- Rating
- 0
P
PrintablesI_need_a_better_name
Tormach TTS Tool Tag
Print it out and use a sharpie or paint marker to put a tool number on it. Then snap it into the ATC grove of a TTS tool. Edit: I found that label tape works better than sharpie or paint. The ink and paint tend to wick into the layers if…
- Downloads
- 42
- Likes
- 5
- Rating
- 0
P
PrintablesTheWylieStCoyote
Test Indicator Holder for Tormach TTS Set Screw Holder
This is a holder a test indicator on a 3/8" or 1/2" set screw TTS holder for finding zero in X, Y, and Z. This requires 2 M3 x 14mm screws and nuts to hold the indicator and form the stop. Because of size variation in prints placing a…
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
PrintablesPeter Davis
Tormach TTS Probe Holder
I attached both the Solidworks file and the STEP file. Feel free to modify and utilize them how you see fit. I keep ours attached to the top of the 770 with magnets adhered to the bottom of it.
- Downloads
- 36
- Likes
- 2
- Rating
- 5
P
PrintablesSlicingblade
BT30 Probe Holder For Tormach
Bt30 Probe mount for inside the machine, Uses 95lb Pull weight screw hole magnets from amazon https://www.amazon.com/gp/product/B072K586ZW/ref=ppx_yo_dt_b_asin_image_o05_s00?ie=UTF8&psc=1 Print Settings Printer Brand: Monoprice Printer:…
- Downloads
- 30
- Likes
- 0
- Rating
- 5
P
PrintablesK Bazee
Tormach TTS tool holder for 1010 profile
Allows storage of TTS style mill tools (20mm shaft) on 1010 size 8020 profile.
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesTheWylieStCoyote
Tormach 440 Coolant Drain to 1/2" ID Tubing
This is a adapter for the Tormach 440 chip pan coolant drain with 1/2" ID tubing. Print instructions PETG 0.2mm layers, with gyroid infill, and 4 perimeters.
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesTheWylieStCoyote
Tormach 440 Tool Holder
TTS tool holders for Tormach 440 chip pan. Print instructions I printed it in white PLA because I had some on hand however PETG maybe a better option
- Downloads
- 29
- Likes
- 5
- Rating
- 0
P
PrintablesPumping Station: One
Soft Jaw for Tormach Vise
A consumable soft jaw for the Tormach Vise.
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
PrintablesDan Royer
Swarf cover for Tormach Electronic Tool Setter
Here it is in action: https://www.instagram.com/p/ByZaIv8HMVW/ This is a simple cup that fits over a Tormach Electronic Tool Setter. My setter lives in my machine, always connected. To keep it clean and in good operation I don't want…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
Printablesmatt guse
Tormach Fog Buster Mount
Hello, I purchased the Fog Buster for cutting Aluminum. I wanted something a little more rigid than the magnet, so I designed this! You can use all the existing hardware from the Fog Buster and mount multiple if you like! I use this all…
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
PrintablesMA Maker Dad
Tormach Slant Pro 15L Lathe headstock funnel
I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I designed this little funnel to catch it and drain it back into the enclosure. You'll need some 1/4" ID hose and you'll…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesKisssys
Tormach TTS tool tightener
This is a Tormach tool tightening system that mounts to the table. It uses 2 one way needle bearings, one to tighten and one to loosen the collet nut. This is not really a 3D printed project except for the bearing cover. The Fusion360…
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
Printablesmatt guse
Tormach Tool Holder
This is my Tormach 770M tool holder. It holds my file, air nozzle, soft hammer, vise handle, and coolant nozzle. The hole pattern matches up with the front holes next to the door. Printed out of PETG. I printed this pretty much as a solid…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesA3D Printing Farm
Tormach BT30 TTS Probe Holder
This is a BT30 style holder for the Tormach TTS Probe. It mounts directly to the side of the control cabinet and utilizes the existing screws.
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesTomasCundick
Tormach XSTech Monitor Mount
Monitor mount for the Tormach XSTech PathPilot monitor. I'm pretty sure it's just a standard VESA mount or something, as the holes' centers are 100mm apart, but this worked for what I needed. The back mounts to some 33mm/1.3" OD PVC pipe…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesBlake Mitchell
tormach 440 tts and hsw mount
This is a mesh of 2 pre-existing systems into one unit to make tool holding on a tormach pcnc 440 as convenient as possible (note, this will only work on a tormach factory enclosure). * im pretty tall, so reaching the tools on top of the…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesKisssys
Tormach Tool System
Holder for Tormach TTS tools. Fusion360 files shared below. Tormach TTS holder http://a360.co/2wjMnmK Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 30 Custom Section…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesTheWylieStCoyote
Tormach 440 Table Cover
Table cover for tormach 440. Print in PETG because of the flexibility and chemical resistance.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesMA Maker Dad
Tormach Slant Pro 15L Lathe Door Rail End Gutters
I noticed the 1" extrusion for the door on the lathe enclosure was just slightly longer than the lower gutter they include with the enclosure so I whipped these little gutters up to help keep coolant in the lathe and off the floor.…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablessamstu
Tormach small cover - Split design
Made these for my Tormach. The Grey machine base had covers either missing or left open to allow cords to pass through. So I made some covers with a 1 inch hole. Covers are a split design so that wires can be left intact to install. The…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesBlake Mitchell
tormach vise handle hsw mount
for the hsw mount you need an m4 nut and m4x10-12mm bolt
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesKisssys
Tormach PCNC1100 spindle lock
I made this spindle lock for my Tormach PCNC1100 but haven't had a chance to use it for broaching. Ended up printing a plastic part and when it fails I'll probably try it out. Yes it's plastic but it seemed pretty strong, I wouldn't think…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesGuybrush T.
Tormach 32447 Engraver Protective Cover
Quick and simple protective cap to fit the Tormach diamond drag engraver #32447 https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=32447 . This protects the tool and your hands from accidents when the tool is not in use.…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesTrevers
Tormach TTS system Tooling Holders for Drawers
Print as many of these that will fit in your drawer. Connect them with the included connector. The generic one will work with drill chunks and collet holders. The set screw one is designed to hold set screw holders. Unlike many of the…
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesBlue Who
Tormach TTS Gridfinity Tool holders
Tormarch TTS holders: ER32 Collect Holder, Set Screw Holder, Tormach's touch tool , and Modular Insert Toroidal Mill
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesTrey Chaffin
Tormach JT1 & JT2 TTS drawer organizer
Tormach JT1 & JT2 TTS drawer organizer Holds JT1 and JT2 chucks used in the Tormach TTS system Category: Tool Holders & Boxes
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesBlue Who
Tormach TTS 3/4" Tool Holder Rack
Tormach TTS tool holder tack.
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesChris
Tormach TTS Wall Bracket
TTS tool holder vertical surface mounting bracket. Could be mounted on the wall or any other vertical surface. The TTS tool holder sits above the bracket so the mating gauge surface on the tool holder is not rubbing up against any surface…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesEmilio L
Tormach TTS tool holder DIN rail rack
A holder for TTS tool holders and a vise handle that mounts on DIN rail. By mounting DIN rail to the sheet metal enclosure of the mill, you can use this to create a tool holder rack, simplifying tool changes. On my PCNC440 I was able to…
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
Printables
Magnetic Tormach Tool Holder
Magnetic Tormach tool holder. Uses your standard magnetic base found on Harbor Freight dial indicator stands. Has a total tool holding compacity of 4 tools and can be magnetically fastened in both horizontal and vertical configurations…
P
Printables
Tormach 5" Vice Speed Handle
Speed handle for Tormach 5" vice Highly suggest you machine out of aluminum Uses 1/4" 20TPI bolt for handle with nut as jam nut. Category: Machine Tools
P
Printables
Magnetic Tormach Tool Holder
Magnetic Tormach tool holder. Uses your standard magnetic base found on Harbor Freight dial indicator stands. Has a total tool holding compacity of 4 tools and can be magnetically fastened in both horizontal and vertical configurations…
P
Printables
Tormach 1/2-13 plug
I made this for filling the holes in my DIY SMW fixture plate vacuum pallet system. Print a test plug to see if you have to scale the print for your printer.…
P
Printables
Tormach 15L Slant-Pro Lathe Tool holder
I designed this to hold the screwdrivers, cabinet keys and Allen keys that came with our Tormach 15L Slant-Pro CNC Lathe. I also added a port for a USB stick for storage. This is designed to mount to the edge of your keyboard shelf with a…
P
Printables
Tormach Passive Probe Grommet
Fits BT30 taper Printed with Filatech FilaFlex40 filament Scale to 102% to account for shrinkage Infill 15%
P
Printables
Tormach Shuttle Safety Cover - No Step
Here's a way to keep from bumping that step button on your Tormach shuttle without reprogramming Path Pilot. Ring file goes around your shuttle and has a notch on bottom for your shuttle's cord. There are 3 cover files included. Normal is…
P
Printables
Tormach 15L Lathe Bar Stock Bushing Set
I printed these using the Bambu X1 Carbon with stock pla settings. The geometry is a little tight fitting so I tuned them by hand to fit the end of the lathe spindle. This keeps longer barstock from flailing about as it extends outside…
P
Printables
Tormach ER16/20 Wrench Holder
Print in TPU or PETG. Bench mount Tormach ER16 / 20 wrench holder.
P
Printables
Tormach Washdown Hose Manifold
Tormach 1100MX Washdown Hose Manifold: Mounts to right side enclosure light bracket, tap with 1/2 and 1/4 NPT tap and use ½ NPT to ½" pneumatic push to fit adapter.