Tormach Fog Buster Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tormach TTS Fog Buster Mount! Modular and Rigid! Version 2
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 276
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Hello,
I purchased the Fog Buster for cutting Aluminum. I wanted something a little more rigid than the magnet, so I designed this! You can use all the existing hardware from the Fog Buster and mount multiple if you like! I use this all the time and move it around depending on my needs.
Print Solid. I used 100% infill. I printed without supports, but it's up to you.
The bolt is for an ¼-20 X 1" Drill the hole out to 5/16" and heat pressed in a brass knurled insert. You could also do metric M6 just drill to the correct size hole.
Drill out holes to for the brass heat press insert. I used a M4 set screw to lock it in place.
Happy Printing!