Tormach small cover - Split design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made these for my Tormach. The Grey machine base had covers either missing or left open to allow cords to pass…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made these for my Tormach. The Grey machine base had covers either missing or left open to allow cords to pass through. So I made some covers with a 1 inch hole. Covers are a split design so that wires can be left intact to install. The slit is intact when printed but will snap apart. The split is also covered to limit chip/coolant/dust intrusion. Install with the small slit cover facing out for clean install. One of my pictures shows a cover installed backwards (The first picture).
These fit Tormach 1100 series 3 and maybe others.
Category: Parts