1 / 4
Tormach small cover - Split design
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made these for my Tormach. The Grey machine base had covers either missing or left open to allow cords to pass through. So I made some covers with a 1 inch hole. Covers are a split design so that wires can be left intact to install. The slit is intact when printed but will snap apart. The split is also covered to limit chip/coolant/dust intrusion. Install with the small slit cover facing out for clean install. One of my pictures shows a cover installed backwards (The first picture).
These fit Tormach 1100 series 3 and maybe others.
Category: Parts