Tormach Slant Pro 15L Lathe headstock funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I designed this little funnel to catch it and drain it back into the enclosure. You'll need some 1/4" ID hose and you'll need to drill a hole in the enclosure to pall the hose through. It mounts to an existing bolt on the machine.
Print Settings
Printer:
Folger Tech Prusa 2020
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25%
Post-Printing
Tap the end holes in the bracket to 10-32 and drill out the holes in the bracket cap to 10-32 clearance size. Mount and run your tubing.
Designed in Inventor 2015
Category: Machine Tools