22 models
Imported from my designs on Thingiverse. Original upload was 21.01.2019 (dd.mm.yyyy) Track rods or links in sizes up to 15L. This a new version. The old one suddenly fell off after the PLA had dried for over half a year Apply a lot of…
Just a simple spool holder for the large 5 and 15lbs spools. Print two of the sides, uses height flat head #6x0.5" wood screws to assemble. will accept metal bar up to 14mm diameter. I'm using a half inch tube. You will need a printer…
Small tool designed to open the internal case clips on IBM 14L10/15L10 (Aptiva) and similar Monitors. These clips can only be reached through a small vertical opening (see image1). Just insert the tool through these openings, making sure…
I printed these using the Bambu X1 Carbon with stock pla settings. The geometry is a little tight fitting so I tuned them by hand to fit the end of the lathe spindle. This keeps longer barstock from flailing about as it extends outside…
I haven't tried yet but i'm sure most size cylinders will sit nicely in the cradle. no supports required use 3 x 12mm cap head screws and m3 threaded inserts. I used 12 but I don't see why you can't get away less! designed for this style…
This Cabinet Magnet Case custom made is great to use on small spaces like kitchen cabinets or any other cabinet you might want to add a small magnetic lock! Print instructions Category: Household Summary This Cabinet Magnet Case custom…
Anti-Roll-Stabilisatoren für meine 15l Tauchflasche Der Durchmesser der Flasche ist 204mm. Die Gurte gehen durch den Boden des Halters, damit sie u.U. noch durch eine Platte auf der die Halter verschraubt werden gehen können und somit…
I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I designed this little funnel to catch it and drain it back into the enclosure. You'll need some 1/4" ID hose and you'll…
Dual SSD/2.5" drive for HP Invictus 15L Height of original was too hight to fit in the drive cage so I recreated it in F360 There are 2 versions. I have a cut-out for a bump in the base of the cage, the other does not. I printed and use…
—————————-Deutsch——————— Hydraulikdeckel für M22,5 Gewinde und 15L Leitungen Version 1.0 Initialversion des Transportdeckels zur Vermeidung von Ölverlust oder dem eindringen von Dreck. Hinweis: Dieser Deckel dient ausschließlich für…
This innovative adapter allows you to easily use 15-liter bags, which are standard in many Blanco waste systems. Designed for versatility and convenience, the adapter offers multiple benefits: Use Standard Bags : Many green waste sorting…
I noticed the 1" extrusion for the door on the lathe enclosure was just slightly longer than the lower gutter they include with the enclosure so I whipped these little gutters up to help keep coolant in the lathe and off the floor.…
This is a design for a weight that weighs approx 15 lbs when filled with cement. It prints in 4 parts that fit together (requires glue for firm hold). No support material is required, and fits on a standard size printer. You will want to…
I designed this to hold the screwdrivers, cabinet keys and Allen keys that came with our Tormach 15L Slant-Pro CNC Lathe. I also added a port for a USB stick for storage. This is designed to mount to the edge of your keyboard shelf with a…
I could not find a suitable model for this DAYTONA 1.5T Aluminum racing jack from Harbor Freight, so I made one. Disclaimer: This is not guaranteed to fit other models of Harbor Freight/Pittsburgh/Daytona jacks. This has only been tested…
You'll need to print two of these and connect them together with M5x8 threaded inserts and bolts. It's admittedly a little tricky to get the bolts threaded in. I used a needle nose pliers to get them tightened up.
The garbage can lasted 9 years so I shouldn't complain, but a new one costs $60. All that was broken was a tiny plastic clip attached to the opening rod. I glued the pieces back together and copied it in Onshape as best as I could.…
Spare part compatible with the WELLGRO 3 x 15 liter stainless steel trash can ( amazon.de , wellgro.de , kaufland.de ). Replacement for the part that connects the rod, actuated by the foot pedal, to the lid, which will break due to stress…
Printed Bambu TPU for AMS, 0.6mm nozzle, 3 top shell, 2 bottom shell, 2 wall loops, 10% gyroid infill for added flexibility.
Space for your Casio HL-815L calculator.
Anti-Roll-Stabilisatoren für meine 15l Tauchflasche Der Durchmesser der Flasche ist 204mm. Die Gurte gehen durch den Boden des Halters, damit sie u.U. noch durch eine Platte auf der die Halter verschraubt werden gehen können und somit…
