1 / 7
Tormach Slant Pro 15L Lathe headstock funnel — zdjęcie 1
1 / 7

Tormach Slant Pro 15L Lathe headstock funnel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I…

Ocena
0 / 5
Polubienia
2
Pobrania
20
Wydruki
0
Wyświetlenia
217
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I designed this little funnel to catch it and drain it back into the enclosure. You'll need some 1/4" ID hose and you'll need to drill a hole in the enclosure to pall the hose through. It mounts to an existing bolt on the machine.

Print Settings

Printer:

Folger Tech Prusa 2020

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

25%

Post-Printing

Tap the end holes in the bracket to 10-32 and drill out the holes in the bracket cap to 10-32 clearance size. Mount and run your tubing.

How I Designed This ===================

Designed in Inventor 2015

Category: Machine Tools

Tagi