Counting matching models…
I needed a chip and coolant fan for a couple of my jobs. So set out to design and print one. I have been running this one at 14,000 RPMS for about 10 weeks now and have zero issues. I am using an 1/2" ER 20 collet. Can be run on most CNC…
I created this Coolant Reservoir Cap to replace my broken one Thread: ISO M33x3 ⚠ Use PETG or a plastic that can withstand higher temperatures. BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support needed…
Ever thought of bleeding/burping your car's radiator? You should probably do it… I suggest you print this on a more heat resistant filament since your radiator's coolant gets pretty hot. This probably won't work as good as the ones you…
UPGRADE<< Check out link for V2: https://www.prusaprinters.org/prints/48474-v2-chip-and-coolant-fan This is a fan for a chips and coolant in a CNC machine. I printed it in ABS and I have no problem running it at 14,000 RPM. You need a ER…
Wargames Wall Coolant Tank - Section 9 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Did you remove your fuse box from the engine bay and are now realizing that the oem coolant reservoir was mounted to that fuse box? Here is your solution!
As I couldn't open my coolant cap with my bare hands, I constructed this tool. It works in no time at all. ----------------------------------------------------------------- Da ich meinen Deckel für das Kühlmittel nicht mit bloßen Händen…
A co-worker lost the cap to the coolant reservoir on his 2010 Dodge Ram 3500 6.7L Diesel truck. He could not find the CORRECT part anywhere- all of the caps sold online were the same part number- and all too small for his overflow tank's…
Coolant Pipes: https://www.amazon.co.uk/gp/product/B008O14864/ Crocodile Clips: https://www.aliexpress.com/item/10PCS-Crocodile-Clips-Insulated-Plastic-Handle-Cable-Screw-Fixing-Power-Terminals-Electrical-Tools/32723865444.html Mini…
As the name implies: a gridfinity holder for the Mitutoyo 293 Micrometer.
I made this for our 2014 Ford Escape's coolant reservoir cap. It can be a bit hard to turn and is tucked in a somewhat awkward spot and this tool helps a lot. It should fit many newer Ford models. I think it may also fit some Mazda,…
A nozzle to allow 360 degree coverage of the cutting cool from only one Loc-Line. Solved the problem I had where with only one nozzle, sometimes the cutter of my CNC router or the part geometry would stop the coolant from reaching the…
Coolant cap designed for the Saab 9-3 2003+. It is designed to go on top of the original cap. It fits excellent, and snaps around the original cap. It's easy to modify it in Tinkercad, to get the logo you want. I printed the cap in PETG,…
¼ npt port added for turbo feed.
You can print and assemble it, it fits perfectly. Leave your like i would aprecciate it. Thanks for your support.
Printed with 5 walls
This includes an adapter for the machine's drain at the back so you can connect the hose straight down, no bends. You will need five M3 bolts and nuts and drill into the aluminum drain part your kit came with to attach it. You may want to…
-Funnel for pouring coolant into the M54 engine, will also fit the M52 engines and probably the M50. - fits into the hole and holds it in place when pouring. - It will certainly fit other makes and models of cars, but unfortunately I have…
For fun Make sure to print in a high temp material like ABS / ASA
For those who have lost their battery cover or relocated it, this clip keeps the coolant overflow hose from flopping around. The clip has 8mm and 16mm inner diameters.
I came up with a replacement end for the coolant pipes used in a helping hands solder station. I printed mine in ABS for strength. The gap for the alligator clip is designed tight so I heated mine up and twisted/push it into place. The…
Print in something that can take heat (i printed in ASA) Bolt should be 16mm wide head hex with m10 thread secured on the backside with a bolt. Update: added a “maintenance friendly” version where the hose more or less lays in, rather…
A 3D printable mount for fitting a generic Chinese mist coolant sprayer to the Shapeoko HDM. Known coolant sprayer models that are compatible: STR-01 YS-BPV-3000 Designed in Solidworks; STEP and STL file of the mount is provided if…
This is a clip to hold the coolant bottle line out of the way of aftermarket hood struts, like the one below. The fuel line clip is 0.1 mm larger than the coolant line clip. I marked the inside of the clip up and down to tell them apart.…
The nozzle can be 3D printed but not the manifold section. It is too porous and will leak. I would recommend making the manifold section from a metal block, then drilling and tapping holes and threads. Nozzle Bore Diameter 2.2mm Nozzle…
This helps coolant reach all around the tool while machining. Currently only tested on a EWS tool holder. No supports needed.
The cap on the coolant reservoir tank of the secondary Hyundai i10 went AWOL. Luckily we had access to another one on the primary i10, so modelling a suitable replacement was straightforward. No attempt was made to replicate the external…
I found a bunch of different plans for a DIY no-fog coolant spray system for standard knee mills so I decided to make my own. These are the parts I designed to mount the spray tube to the spindle. I originally made the arms 6" long and…
Coolant drain for tormach 440 factory coolant pan to 1-1/2" PVC tubing.
I recommend using a chemical resistant and relatively strong filament. For this one I used Overture Pure PETG clear. As far as settings go it’s pretty standard, nothing fancy, no supports. Recommend infill of 40% or higher. Follow your…
Originally made from ABS, so you can print from the original material. Works with the original rubber seal, from the factory cup. If you don't have the seal you can cut from rubber. Printed on the bottom with tree support, and thick…
Thanks for the idea. This is a remix for Flexible coolant pipes. Coolant Hose Joint Thread 12.5mm: http://s.click.aliexpress.com/e/7233Vv3 Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 19 Notes: ABS…
Designed originally for a couple friends with SS Trailblazers, but this cover friction fits over the factory GM Dex-Cool 15060681. I've printed these in ASA, as they just slip over the original cap. I've included the STLs for the…
Alternative coolant "trough" for the Shariff DMC Mini CNC mill. Uses original screws.
For those Mazda 323 fans
This adapter bolts on to the end of the coolant tray on the rear of the DMC2 to adapt to a 1.25 inch drain tube. a much nicer and cleaner connection than the big clear hose supplied in the kit. I used 1.25 inch marine bilge pump hose. You…
A very small part, print it using a small nozzle (0.25 or smaller). You'll need 8 of them.
This is a wire holder/guide for the Shariff DMC2 CNC. It is used to separate and hold the spindle cable of wires on one side of the coolant line and keep the stepper motor wires and encoder cables on the other. This is a nice alternative…
Same as the original, i just added a 2nd mounting hole. Use supports and run the zip tie between the mounting bosses to stop it sliding off.
This is mount can be printed either with or without two WAGA connector mounts for easy connection/disconnection. The body of the mount has holes that line up with the screws on the sensor body so you need to replace the screws that come…
The coolant return hose did brake when we did an repair on an customers Ford kuga 2015 mod. I have printet the part and did try to mount it, it needed som smal changes. Before i could test the new one we got the new hose that we mounted…
This is a adapter for the Tormach 440 chip pan coolant drain with 1/2" ID tubing. Print instructions PETG 0.2mm layers, with gyroid infill, and 4 perimeters.
Bracket to hole a VW/Bosch PCE 12 Volt electric coolant pump. Commonly used in electric vehicle conversions. 2 part design. Can be used with M6 or M8 bolts on the sides. Printed at 50% infill in PETG.
I needed a solid way to mount my coolant expansion tank in my car. I drew up a simple mounting bracket to be able to accomplish that. the counterbored holes are made to fit a ¼" x 2.5" sockethead cap screw.
This is a reinforced replacement for the factory "Mickey Mouse" coolant flange found on the BMW E92 (N51/N52/N54/N55 engines). The original plastic part is prone to crumbling, leading to rapid coolant loss. This model is designed for…
Print with the part laying flat on the build plate. You can print it in one large piece or glue it togheter after printing. To seal it with the existing part of the grinder you need to use some silicone. It cuts out nearly all of the dust…
This is a tool to help you drain the coolant from a Volvo Penta marine diesel engine. I designed it for my D1-30A engine. The D1-30 has two coolant nipples or draincocks which must be opened to drain the coolant. One of mine, the one next…
I also had problems with the wider threads on the pipes from aliexpress. Unfortunately I already printed 10 of this sockets before receiving the items from China. I didn't recognise that there was a remix for wider threads online…
This model was made to attach this Mist Coolant to an LR3 using @DougJosephdesign8stu Kinematic Mount System
Wanted to simplify watercooling line bending. built a mandrel guide jig to help. If you print it in resin it won't melt when you heat the acrylic lines.
Made this for the Cooler master Contest here on Printables.com MasterLiquid ATMOS customizations Lid Cap thingy:)
Made these little turnbuckle clips for Peugeot Boxer / Citroen Relay vans that hold down the access cover for the coolant reservoir 12 walls, 0 infill, painted on Fuzzy skin for grip area I used PLA for the red one (black one is original)…
Print in place, it is technically 2 parts, but I have a small breakable bridge joining them as one stl. From what I can tell the original cap uses something like a 14x3mm o-ring (I suppose you could borrow the one off the oem cap). I did…
Prevents collant to flow to the side without the drain to prevent cleanig there
This tray is designed for the Nomad 3 and to be used with the Carbide 3d aluminum fixture board. It does not utilize the center bolt. designed to use minimal filament.
Rear plate for your Toyota Hi-Ace or other 2RE motor. Mine rusted though and had a pin hole leak, will result in a leak around the right hand side of the transmission body. Toyota sell them for <$20 but are often 4 weeks out so this will…
Quick whip together for a gentleman on one of my car 3D printing pages. Coolant res cap with insert and gasket. Use chem resistant for body and insert and tpu or the like for the gasket or cut one out of silicone. Print setting are on…
33-30MM Straight pipe reducer - PRINT IN NYLON PA6/CF/12 AS IT NEEDS TO WITHSTAND TEMPS AND PRESSURE ON AUTO APPLICATION.
NCC - 31MM STRAIGHT COOLANT PIPE CONNECTOR 8MM T JOINT FOR BLEED LINE/OVERFLOW - PART OF WHAT WAS NEEDED FOR THE MK3/2 SCIROCCO RADIATOR BUILD - MAYBE SOME USE TO FELLOW IDIOTS :D
Tesla model S small rear drive unit coolant port designs. The dxf is just the plain outline in case you want to cut your own and thread a port in yourself. The BSPT file is threaded for a BSPT 3/8in hosetail. The other step file is the…
Background : I noticed dirt was getting into my coolant overflow tank on my 1999 Toyota Prado. It looked like the gasket was no longer sealing, so I modeled up this replacement. You cannot buy just the gasket from Toyota, you can only buy…
EN: To identify a coolant pump. DE: Zur Kennzeichnung einer Kühlmittelpumpe.
A client asked me to design a replacement thread cap for the coolant tank of their Voge motorcycle, and this is the resulting V1.0 design . While it is fully functional, there is still room for future improvements and tweaks. What's…
Plastic holder Hyundai i40 - coolant rubber hose under the air intake, close to radiator. Printed PETG. INSTALLATION AT YOUR RISK.
Mounts to the left side of the spindle using M5x20mm Socket Head Cap Screw.
Coolant manifold piping designed specifically around a generic HT07-4A turbo. The HT07 turbo comes in a number of varieties so please confirm fitmet with a test print in PLA or similar. This is intended to be used as a functional…
Chipmunks were dropping acorns, making nests, and chewed up a hose in my tractors air intake assembly so I made this grill to help keep them out. Its made to fit a '22 Kubota BX2680. It is two pieces so it may work for other models.…
This organizer is designed specifically for the BG coolant flush machine . It keeps both male and female quick-connect fittings neatly organized and easily accessible right on the side of the machine. No more hunting for the correct…
This organizer is designed specifically for the BG coolant flush machine . It neatly stores and organizes both male and female threaded connections right on the side of the machine. No more loose hoses, lost fittings, or wasted time…
The coolant return hose did brake when we did an repair on an customers Ford kuga 2015 mod. I have printet the part and did try to mount it, it needed som smal changes. Before i could test the new one we got the new hose that we mounted…
Quick whip together for a gentleman on one of my car 3D printing pages. Coolant res cap with insert and gasket. Use chem resistant for body and insert and tpu or the like for the gasket or cut one out of silicone. Print setting are on…
Made these little turnbuckle clips for Peugeot Boxer / Citroen Relay vans that hold down the access cover for the coolant reservoir 12 walls, 0 infill, painted on Fuzzy skin for grip area I used PLA for the red one (black one is original)…
Tesla model S small rear drive unit coolant port designs. The dxf is just the plain outline in case you want to cut your own and thread a port in yourself. The BSPT file is threaded for a BSPT 3/8in hosetail. The other step file is the…
Plastic holder Hyundai i40 - coolant rubber hose under the air intake, close to radiator. Printed PETG. INSTALLATION AT YOUR RISK.
Replacement part for the BLOQ4 and BLOQ5 pre-filter that is used inside the machines for the flood coolant. prints very well in PLA and also holds up ok in normal use.
UPDATE: Don't print this! It fits, however the reservoir cap on this reservoir is sealed around the inner diameter of the pressure release valve on the cap with an o-ring. I will update this design later to make use of the same o-ring.…
15mm coolant ball for cnc lathe, length of nozzle is roughly .300in, provides adequate flow, designed for use with boring bars and drills but obviously could be used for a range of applications. Print ball side upwards and use a brim, I…
45deg 15mm coolant ball for cnc lathe, designed for use with od turning tools to provide a more direct flow of coolant to the insert. I recommend using a brim and printing with petg or abs/asa for higher strength and temperature resistance.
Coolant reservoir cap replacement, compatible with Nissan Altima 2012
For vacuum or pressure testing of the coolant system, this is designed to be printed out of TPU, Feet add stability when printing, model should press tightly over the ends of the larghe cast metal and plastic fittings leading to the…
I made a holder to mount a D1-30–type coolant/expansion tank from a Volvo Penta in a different location. I printed it in HT PLA, and it works great. It seems that this coolant tank is also used on other Volvo Penta marine engines as well…
To vacuum while you are soldering. Please use M3 screws (the length depends your FAN) to assembling it. Sorry for the bad photo quality, I will replace later the photo. Fun Fact: Printed with "Bumblebee". :) Buy me a coffee Category:…
Table riser for use with Inland Coolant Pump for Kristall 2000S Glass Grinder. I added a spiral internally and that has helped with consistency in getting the water started flowing up and out of the spout. Takes a bit to start sometimes…
Simple funnel for filling coolant, oil or washer fluid.
Replacement part for the BLOQ4 and BLOQ5 pre-filter that is used inside the machines for the flood coolant. prints very well in PLA and also holds up ok in normal use.
Need to prevent metal shaving to enter the coolant tank. Simply print using ASA, fit hose in, and plug it on top of plastic basket. FYI, I am using the OEM 22mm coolant hose. All units are millimeters (mm)
This is a mount I built to hold two 800ml bottles side by side and mount a small windshield washer pump. I'm using 1/4" foam on the bottom and sides and two long zip ties to hold them in place. Printed with support and it was a bit…
Used to mount a 80mm fan to a coolant pipe. Stick the mount on the end of the coolant tube and then glue or tape it. It would be possible to run the fan cabled down the coolant pipe, I just havent done that. Category: Electronics
i created a holder for my lisle coolant funnel #24780 3 5 mm mounting holes i used 3/16 rivets but you will need to use something with a pretty flush head as to not interfere when inserting. may also work with other brands Print Settings…
A fast and easy coolant knob/switch/lever to actuate a valve. Designed for a Kellenberger Cnc-grinder.
I designed this to help keep coolant from splashing onto the floor while using the saw. It sits right on the length setting bar and catches the coolant from the right side nozzle. Edit 12/20/23: Made a V2. This version eschews the…
I designed this to help keep coolant from splashing onto the floor while using the saw. It sits right on the length setting bar and catches the coolant from the right side nozzle. Edit 12/20/23: Made a V2. This version eschews the…
Quick scoop to remove the tramp oil from the top of the coolant trap. First concentrate the oil to one side of the tray with a flat bar. I made my bar from scrap plywood. The bar is held up with two adjustable plywood wings so you can let…
Cap for Honda accent 2010 coolant reservoir. Been using it for 2 months+, there has been no issues with regards to thermal deformation on it. So feel free to use, but I would still advise you to check it once in a while if stills fit…
Coolant Cap New Holland. Printed with PETG(Recycled Water Bottle) Layer Height 0.3 Infill 100% Supports (Very Easy Break Away) Build Plate Adhesion Brim width 8.0mm Line 20 Outside Only
This is an adapter for refilling coolant in a car and afterwards bleed the coolant system for cars that are using the classic coolant cap design. Basic instructions: Using the parts: -Close the passage to the overflow tank using the Plug…
Designed for Use with these cheap coolant tubes and alligator clamps https://www.aliexpress.us/item/2251832626681832.html https://www.aliexpress.us/item/2251832573522848.html Magnet size is 6mm x 2mm (Gridfinity size) Magnets press fit,…
I created this coolant resevoir cap for my 2004 Yamaha Grizzly 660. The Dealer ship wanted $50 for this!!!!. it fits very snug as there is no gasket in this like the OEM. you can upsize this model or downsize it to fit almost any atv/sxs…
![Kia - Hyundai [Inverter] Coolant Reservoir Cap SST](https://media.printables.com/media/prints/dae39b14-66f0-4909-a851-ae2ce6176e76/images/13686907_1bda379a-51d0-4470-9685-350cd7129102_920817b0-3c27-43f1-94b9-afe2a22249aa/cap_inside.jpg)
