Chip and coolant fan for CNC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UPGRADE<< Check out link for V2: https://www.prusaprinters.org/prints/48474-v2-chip-and-coolant-fan This is a fan for…
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 407
- Makes
- 2
- Views
- 4,384
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
UPGRADE<<
Check out link for V2:
https://www.prusaprinters.org/prints/48474-v2-chip-and-coolant-fan
This is a fan for a chips and coolant in a CNC machine. I printed it in ABS and I have no problem running it at 14,000 RPM. You need a ER 16 3/8 collet to use this. The profile should be a snug fit then turn tight on the rod with the 3/8 collet. Also has holes for through spindle coolant
Fusion360 file with parameters for pitch and height. (Have fun experimenting)
Print instructions
Print in ABS, .20 mm layer height, support optional, with 5 perimeters.