Toyota Coolant Reservoir Cap Gasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement gasket for the Toyota coolant recovery tank on older Toyota models.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Background: I noticed dirt was getting into my coolant overflow tank on my 1999 Toyota Prado. It looked like the gasket was no longer sealing, so I modeled up this replacement. You cannot buy just the gasket from Toyota, you can only buy the cap which for my car is TP/N 16405-75020.
Application: It will definitely fit Toyota Land Cruiser Prados or 4Runners from 1996-2002. It also might fit later models but I have not verified. Give it a print and let me know how it works if you have a different model.
Print Settings: I used Overture 95A TPU, 2 top and bottom layers, w/ 25% gyroid infill. I did this to attempt to give it some squish. I test printed two, one with 100% infill and one with the gyroid at 25% and the 25% is a little squishier. Honestly 95A is probably a little on the hard side, and if you have a softer TPU I would recommend using it. A reminder to dry your TPU for 8 hours before printing unless you have stored it with lots of desiccant.
Don't forget to do a coolant flush if you have lots of dirt in your tank like I did.