Toyota Tundra Coolant Funnel Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed one of these for the Tundra Engine recalls to bleed the system efficiently.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
I recommend using a chemical resistant and relatively strong filament. For this one I used Overture Pure PETG clear.
As far as settings go it’s pretty standard, nothing fancy, no supports. Recommend infill of 40% or higher. Follow your material guidelines and it should come out good.
You will need an O-ring that fits the slot at the end. Lubricate before use with either coolant or silicone lubricant.
If for any reason the end breaks off which I have seen happen with other models (not this one) you can use a large O-Ring to fit around the threads and it will work the same. Pictures shows both O-ring positions for demonstration purposes.
Remember to follow Toyota instructions for the bleeding procedure for best results. Good luck!