Toyota Tundra Coolant Funnel Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed one of these for the Tundra Engine recalls to bleed the system efficiently.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I recommend using a chemical resistant and relatively strong filament. For this one I used Overture Pure PETG clear.
As far as settings go it’s pretty standard, nothing fancy, no supports. Recommend infill of 40% or higher. Follow your material guidelines and it should come out good.
You will need an O-ring that fits the slot at the end. Lubricate before use with either coolant or silicone lubricant.
If for any reason the end breaks off which I have seen happen with other models (not this one) you can use a large O-Ring to fit around the threads and it will work the same. Pictures shows both O-ring positions for demonstration purposes.
Remember to follow Toyota instructions for the bleeding procedure for best results. Good luck!