PocketDock for Philips MiniRTE 9000 Hearing Aids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,14 € – 2,62 € netto (bez VAT)
Dla pliku: Bottom (1)_0.4n_0.2mm_PETG_MK4S_2h7m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,38 € netto (środek widełek).
- Masa podana przez autora
- 38 g
- Czas druku podany przez autora
- 2,11 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a size reduction of the original charging station for Philips MiniRTE series 9000 Hearing aids. 2.5 × 3.5 x 4.5
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
The official charger for the Philips MiniRTE 9050 hearing aids is massively oversized—perfectly fine at home, but far from ideal when traveling. Since I already carry a universal USB-C charger for my iPhone, iPad, and Apple Watch, bringing a bulky dedicated charger station felt unnecessary.
Fortunately, the Philips charger electronics runs on standard 5 V USB, which opened the door to creating a compact, travel-optimized alternative.
The result: a super-small custom charging case that houses the two charging holders and the original circuit board in a footprint of just approx. 2.5 × 3.5 × 4.5 cm—a huge reduction compared to the stock charger.
To make it even more useful, I designed a protective transport cover. When closed, it keeps your hearing aids safely secured using the built-in magnets from the holders—perfect for traveling light and staying organized.
Printing Instructions
Printed in PETG, 0.2 mm layer height
Supports: from build plate only
See the included .3mf file for recommended slicer settings
PLA has not been tested. It will likely work, but PLA can be brittle, especially around screw holes and snap features.
Assembly Instructions
To build this compact charger, you will need an original Philips Series 9000 hearing aid charger (used for MiniRTE 9030 and 9050 models).
Open the original charger
On the bottom, under the label, you will find two screws. Remove them and carefully open the housing.
⚠ Be gentle—do not pull or snap the wires.
Remove the electronics
Keep the original screw that holds the circuit board.
The internal steel weight plate is not needed for this project.
Install the circuit board
Place the board in the printed case. You may secure it using the original screw—optional, but tidy.
Insert the charging holders
Slide the two charging cradles into the same half of the case.
The magnets make alignment a little finicky—take your time.
⚠ Avoid damaging the spring-loaded contacts.
Close the case
Position the second half of the enclosure, ensuring no wires are pinched and all components sit correctly.
Secure the enclosure
Use two small self-tapping screws. Their heads also act as a locking feature for the transport cover.
Warning
Opening your original charger voids the warranty.
This design was built for the Philips MiniRTE 9050 and also fits the 9030.
It has not been tested with other hearing aid chargers or brands.
Please
If you print this model or remix it, please upload a photo — it motivates me to keep designing new things!