Tenor Recorder Stand / 3-Part Holder with Accessory Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy, custom-designed stand for storing your Tenor Recorder securely.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder ensures the three parts of your instrument are safely separated and organized. It is also designed to hold common cleaning accessories.
Key Features & Design:
3-Part Organization: Dedicated slots for each part of the recorder:
Top Shelf: For the Middle Joint
Middle Shelf: For the Head Joint
Bottom Shelf: For the Foot Joint
Integrated Storage: Includes dedicated holders for a Grease Pot and the Cleaning Rod.
Dimensions: Width 108 mm, Length 155 mm, Height 85 mm.
Compatibility: Tested to fit the Mollenhauer 5406 and Aulos 211A Tenor Recorders.
Assembly Note:
The inner edges where the recorder rests are designed to be padded. For optimal protection, apply felt padding (e.g., self-adhesive felt strips) to these contact surfaces.
Print Settings & Instructions:
Material: PLA or PETG. (PLA was used for testing, but material choice is flexible.)
Layer Height: 0.2 mm
Infill: 10–20%
Perimeters (Walls): 3
Top/Bottom Layers: 4
Supports: None required.
Printing Orientation: Print the holder standing upright on its largest base for maximum strength and best surface finish.