Omron D2HW-A201 to D2HW-C201H adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to let you use the D2HW-A201 where a D2HW-C201H was required.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I was in process of building the NightOwl filament changer and found they had uploaded a mod called D2HW Hub.
This removed the ball bearing and D2F microswitch and replaced it with a vastly more expensive D2HW-C201H Omron microswitch which is more commonly used in automotive applications.
I found a better deal for the D2HW-A201 which just didn't have the 3mm ring at the rear. So I thought let's make an adapter that lets this switch work and stay in place making it cheaper and just as good as the more expensive one.
Then I thought why not one that isn't specifically to the NightOwl Kit so if someone else has a different requirement they can also use the A201 just the same.
As such both are here I've included step and F3D for those that want to adjust it to their use or a similar non Omron switch that isn't the same dimensions