Pine64 PineTab2 USB-to-UART Debug Adapter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model was designed for the USB-C debug adapter that comes with the PineTab2. I could not find any other case models
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 39
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MINOR UPDATE: Shinethru LED holes for TX and RX have been shifted 1mm. Please redownload "Top_part_LEDs.stl" for the proper version.
This model was designed for the USB-C debug adapter that comes with the PineTab2.
I could not find any other case models, so I made one. Designed in Solidworks. Sliced in OrcaSlicer. First printed on the Elegoo Centauri Carbon.
2x Lids with and without LED shine-through holes.
3D printing settings
Slicing in OrcaSlicer 2.3.0
Elegoo Centauri Carbon FDM Printer
Jayo PLA Filament
20% infill (Triangles)
50mm x 30mm x 10mm
No Support Structure (Or Touching Build Plate)
20-30 min print time depending on layer height