Liczymy pasujące modele…
Meet your new desktop buddy! I originally designed this little guy as a gift for a programmer friend, but he turned out too cool not to share. Whether you're fixing a critical bug at 3 AM or just need someone to listen to your code logic…
A simple locking PicoPi case for making the Pico programmer and Debug device PicoProbe, The Raspberry Pi Debug Probe is a USB device that provides both a UART serial port and a standard Arm Serial Wire Debug (SWD) interface.
This 3D-printed educational resource was designed to give students a hands-on, visual understanding of how RAM memory works and how variables are managed in programming. The first image shows a memory structure organized into multiple…
MINOR UPDATE: Shinethru LED holes for TX and RX have been shifted 1mm. Please redownload "Top_part_LEDs.stl" for the proper version. This model was designed for the USB-C debug adapter that comes with the PineTab2. I could not find any…
a simple case for the pinecil case. The fit is ok but not 10/10. You will need to cut the pins short on the underside.
You would need: - 8x 1mm pogo pins - 2x 2x12mm screws to hold it - 2x 2mm nuts Print in 0.12mm layer hight otherwise you risk to be almost imposible to slide the pogo pins. Sliding the pins one by one. Tested and worked great!
Meet your new desktop buddy! I originally designed this little guy as a gift for a programmer friend, but he turned out too cool not to share. Whether you're fixing a critical bug at 3 AM or just need someone to listen to your code logic…
A simple locking PicoPi case for making the Pico programmer and Debug device PicoProbe, The Raspberry Pi Debug Probe is a USB device that provides both a UART serial port and a standard Arm Serial Wire Debug (SWD) interface.
The Teknic ClearCore motion controller has a JTAG debug port on the PCB, but it isn't accessible without removing the cover. This replacement cover has an opening for the debugging cable to attach without leaving the entire board exposed.…
AI generated Rubber Duck Debugger. Playing around. First of all I generated an image using Dall-E. After this, I generated a .3mf file using an AI 3D generator using the image as input. As the size was very small, I scaled and reoriented…
Enclosure designed around Microchip’s new MPLAB® Snap in-circuit Debugger/Programmer, part number PG164100-ND . The debugger is compatible with most AVR®, SAM Flash, dsPIC® and PIC® devices. Designed to be compatible with ICSP and 2-wire…
To access the debug port of a CC3200 Toniebox PCB, you can use some specialized adapters, soldering skills or - and this is something many of us will have - acupuncture needles. In order to easier position the needles (1/20" spacing…) and…
This is a mechanical toy I've made, it is designed after a codebug, the mascot of a Vtuber called Ellie Minibot. It's quite finicky and it requires quite a lot of time to assemble. I will probably make a video about how I designed it but…
A gridfinity holder for the raspberry pi debug probe
Protect your SuzyQ debug board with this shell and don't worry anymore about having to touch it directly. It's designed to be as compact as possible (fits with thin devices like a Pixelbook), so the walls are as thick as possible (ie…
You can get the FreeCAD model here: https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/pico_debug.FCStd
This 3D-printed adapter holder allows easy access to the underside SWD pads of the Arduino Nano 33 IoT — completely without soldering. It’s designed to hold standard Dupont jumper cables or spring contacts securely in place, enabling…
Seeed Studio XIAO Debug Mate is an open-source ESP32-S3 multi-tool that simplifies embedded system debugging with visual feedback. This all-in-one device features a standalone 2.01 inch TFT LCD display, LED status matrix, and native Seeed…
Scanned using Creality CR-Scan Lizard. Note that this is not the whole D5, but rather the debug port & bumper, which is useful if making a custom PCBA for https://github.com/Philip2809/neato-connected
Simple 45 degree holder for the widespread 128x64 pixel 4-Pin OLED screens: https://create.arduino.cc/projecthub/MisterBotBreak/how-to-use-an-oled-screen-128-per-64-cb6e4d Required screws and nuts: 4 pieces of M2x8
Print the lid with support for the name plate, then remove the support. Recommendation to print the name plate is using a 0.25 mm nozzle. For multi-color parts you can change the filament during the layer print. You need 6x M3 30 mm…
Raspberry Pi Pico Debug Probe Case This is a compact and practical 3D-printable case designed for a Raspberry Pi Pico used as a debug probe . It protects the board from accidental damage, makes handling easier, and gives the probe a clean…
A simple one piece sleeve case for the Particle Debugger . To use, insert the board USB connector first (orient so headers are exposed). Follow the guides on the sides until fully inserted, then press down on the ends of the board to…
PCB-design can be found at : https://github.com/ene9ba/PicoProbeHolder.git
Simple holder for the Pico Debug'n'Dump by stacksmashing. You can buy the Pico Debug'n'Dump at https://stacksmashing.gumroad.com/l/picodnd . (You'll also need a Raspberry Pi Pico and a Display if you want it to look like mine.) The board…
Description I've remixed the case with decals, because I love multicolor decals. :) Print Instructions Printed with standard 0.2mm settings except I have initial layer speed set to 10mm/s. Here's my process for Inlays Place both the top…
A dedicated case for the smallest usable RP2040 board I could find. It has labels for pins used by Picoprobe and a separate hole for each cable to prevent tangling. It screws together with (up to) 4 M3 14mm screws (and nuts). The project…
Visual Studio Debugging Keyboard This is a Keyboard for debugging control in Visual Studio. It features buttons for build-run, stop, rebuild, step over, build, step into and step out of. It is designed around an adafruit pro trinket.…
Tag connect pins are easy to break. Also they are easy to lose. This provides a cap that you can loop around your 6 or 10 pin tag connect probes. In the file list there is two different models and their corresponding openscad design…
This is a 3d printed retaining clip for tag connect debug probe. This is because the clip provided by tag connect is expensive. Dimensions is based on http://www.tag-connect.com/Materials/TC2030-IDC.pdf This openscad design used my…
SWD debugger for Raspberry Pi Pico. For detailed instructions, Getting started with Raspberry Pi Pico - Appendix A: Using Picoprobe . However, he doesn't like the exposed state of the board shown here, so he puts it in a case and makes it…
I made this as a temporary mounting bracket for debugging and beta-testing an unusual pi-based project that involves using a SIM7600x module (providing 3G/4G data and GPS to my build). If anyone else has use for it, you're more than…
Built for “The Shikra” made by XIPITER (INT3.CC) https://int3.cc/products/the-shikra The Shikra is meant to be a more reliable replacement for the shortcomings of other tools like the BusPirate . This model was made because the case model…
Jig to solderlessly attach to the CPU debug pins of the Hubsan Q4 or Estes Proto-X quadcopters for hacking. Useful for working with bradwii firmware. My Proto-X looks like it has a conformal coating over both side of the board, including…
A simple one piece sleeve case for the Particle Debugger . To use, insert the board USB connector first (orient so headers are exposed). Follow the guides on the sides until fully inserted, then press down on the ends of the board to…
