1 / 4
Wedge Mount for use with Anker Prime MagSafe Car charger on 6th Generation Subaru Outback — zdjęcie 1
1 / 4

Wedge Mount for use with Anker Prime MagSafe Car charger on 6th Generation Subaru Outback

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple wedge mount spacer for use with Anker Prime MagSafe Car charger on 6th Generation Subaru Outbacks

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
213
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This is a simple wedge mount spacer for use with an Anker Prime MagSafe Car charger and installing on the heater vent to the right of the steering wheel on 6th Generation Subaru Outbacks.  This may also work on other Subaru's that have the same dash configuration as the 6th generation Outback.

To install the finished wedge spacer you would first loosely  install the Anker car charger on the right most vertical fin of the heater vent to the right of the steering wheel and then utilizing the slit in the wedge spacer, slip it behind the base of the car charger (this is a little bit of a challenge) and then tighten the car charger up against the spacer.

I used TPU for printing this spacer as it needs to be flexible to install it.

Tagi