1 / 3
Friction Cam for Virpil WarBRD Joystick Legacy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a specific cam for Virpil WarBRD joystick so its grip keeps its position when released instead of returning to it
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1013
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (12)Powiązane
Press Like for encouragement. Comment for improvement.
Specific cam for a Virpil WarBRD joystick that keeps the grip position when released instead of returning to its centre position.
Youtube video of the 2nd version.
Print:
- I uploaded all 3 versions. The new one is in remix.
- The slider is printed in TPU. The alternative diamond-shaped slider provides less friction, but prevents the sticky feeling, when it starts moving.
Assembly:
- Remove both cams, the spacers and the extension spring. → Virpil's video on Youtube.
- Set the spring apart for reassembly.
- Assemble the 3D-printed parts and the spring.
- Install the assembly inside the base in place of the cams.
Notes:
- You will need to raise the base by 3mm (2 washer) from the bottom plate.
- The rubber shroud of the base acts like a spring. I replaced it with a fabric shroud.
- Detent marks can be added to the 3rd version with this device.