1 / 3
Friction Cam for Virpil WarBRD Joystick Legacy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a specific cam for Virpil WarBRD joystick so its grip keeps its position when released instead of returning to it
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 74
- Makes
- 0
- Views
- 1,013
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Press Like for encouragement. Comment for improvement.
Specific cam for a Virpil WarBRD joystick that keeps the grip position when released instead of returning to its centre position.
Youtube video of the 2nd version.
Print:
- I uploaded all 3 versions. The new one is in remix.
- The slider is printed in TPU. The alternative diamond-shaped slider provides less friction, but prevents the sticky feeling, when it starts moving.
Assembly:
- Remove both cams, the spacers and the extension spring. → Virpil's video on Youtube.
- Set the spring apart for reassembly.
- Assemble the 3D-printed parts and the spring.
- Install the assembly inside the base in place of the cams.
Notes:
- You will need to raise the base by 3mm (2 washer) from the bottom plate.
- The rubber shroud of the base acts like a spring. I replaced it with a fabric shroud.
- Detent marks can be added to the 3rd version with this device.