Counting matching models…
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
Update: Added ML_12mm.STL for two layers and ML_24mm.STL for a single layer. --- This is the first of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and three of the push buttons from my Arcade…
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
Grip for flight simulation 0.16 layer height is recommended All the components are avaiable on : https://polysim.fr How to assemble : https://www.youtube.com/watch?v=2aSrMxbHL8U&ab_channel=Polysim
This cap is for the KY-023 module, i added a bit over 0.25 mm of tolerence. Based on your printers accuracy you might need to scale it to 105% or 110%, it worked fine on my Ender 3 v2 neo. some other styles of this are coming out!
Atari Joystick Box. Add your own booleans to make magnet holders. This is intentionally left unfinished so you can resize the joystick then add your own magnets to make top magnetically adhere to bottom. Feel free to post your…
Wheelchair Controller Handle 6mm Mount Joystick Printed with TPU
🎮 Atari Joystick Grip Ball – Support-Free Print Design Upgrade your classic Atari joystick with this custom-designed grip ball, crafted for a snug fit and smooth handling. The model prints cleanly without supports, and a tiny vent hole…
Precision Joystick for controller I designed it to play fpv simulator with my xbox controller 3D : 20% , 50mm/s
This model Came from Blender. This toy can be assembled together with glue, personaly I would use supper clue. You may need to resize it; it works better when its small. let me know if I need to chang anything.
A quick restrictor gate I cooked up for my Zippyy stick for Street Fighter V. It's a pretty quick print and mounts using the original screws and holes. Not the shortest throw, but to me it feels much better than the square gate it comes…
Replacement joystick switch actuator for low‑cost RC controllers. This spare part transfers joystick movement to the internal micro switches and is intended for repairing or replacing broken original parts in budget RC transmitters.
A simple spacer that eliminates dead zone on the FIRE button of The QuickShot II joystick. If the spacer does not fit tightly on the FIRE button pin, use a small amount of glue to secure it. The photos show the FIRE button pin, the micro…
I've created adapters to fit the exchangeable joystick tops of xbox elite controllers to the ROG xbox ally. The interfaces for xbox elite series 1 and series 2 controllers are different, please print the version fitting for your…
This model was designed to adapt the FPV drone's pods to a PS5 controller, allowing it to be used in flight simulators. This way, you can train using a standard controller while maintaining a flight experience very similar to that of a…
This figit-toy is my first attempt at any kind of print in place mechanism, I really like how it moves and makes for a very fun toy. It is nice and small so will not need very much filament to print, could be a great gift if you just need…
Just an extended joystick i made. can be printed vertically, as i did, with 5 walls. However, horizontal as i am including the model is best. I recommend using PETG. if printed vertically, be sure the bottom of the part that touches the…
A quick release plate to easily remove your joystick from your cockpit, for the Virpil Warbrd and alikes. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
Tired of losing grip on your joystick during intense gaming sessions? I know the struggle—sweaty hands and sliding thumbs make defeating tough sections nearly impossible. That’s why I designed this perfectly fitting joystick mold for the…
This simple plug replaces the standard joysticks in a PS Vita, allowing you to put your console in your pocket or bag without worrying about damaging the joysticks. It's obviously not for everyone, it's only useful for people that don't…
Mini joystick, easy to buid no board needed, just the push buttons and cable
🎮 Joystick de navigation CAO DIY lien video : Instagram Youtube Contrôlez Fusion 360 & SolidWorks comme une SpaceMouse Construisez votre propre contrôleur compact pour naviguer fluidement dans les modèles 3D à l'aide d'un joystick et d'un…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Ursa Minor. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Thrustmaster Warthog base. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks!…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Thrustmaster AVA base. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Orion Base. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
A quick release plate to easily remove your joystick from your cockpit, adapted for the VKB Gunfighter. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
This DrivePlate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate is designed to mount the ASL 128 Molecule joystick , allowing the wheelchair’s primary drive control to be installed within the DriveKeys modular…
Caja para la placa de expansión Joystic micro:bit Waveshare, en dos piezas que encajan a presión. Permite el uso de todos los elementos de control, acceso al interruptor de batería y visualización de los led de BAT y PWR. Dimensiones 156…
Prevents joysticks on the switch 2 from tilting and clicking the sticks during travels which might cause drift issues
Made this just for fun for the Sensory Play Contest, because I have childrens, wanted to do some interesting fidget and had thoughts that I have skills to make it :-) Size is ~ 5x5cm. You need the glue to stick 2 sides of hull together. I…
Transport joystick for Sound Devices Mixpre-10 (all models) that likes to break There are two versions: with bevel and without print with standard PLA/PET-G settings, no supports needed
A replacement stick for any official Gamecube controller. Dimensions: 2.64x2.64x1.85 cm I printed this and it fit. Maybe make sure the inside of the shaft has no supports generate inside or it might be hard to remove.
Many PSP have scratches under the Joystick, because the clearance is too little. I made a simple solution for this, i wanted to share: A 3D printable Joystick leverage plate. You put it under the Joystick as shown in the photos. The…
Designed to be printed upside down. It slides right on my controller with a snug friction fit, but C sticks vary by size depending on brand. If it's too loose, wedge a small piece of paper or something in when you're putting it on.…
Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now. in anycase there is now all 14 of the joysticktop set 2 variations that were previously locked behind my Patreon. ... Here…
Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now. in anycase there is now all 12 of the joysticktop variations that were previously locked behind my Patreon. ... Here are…
Fully printed clip-on adapter for the modular XBox Adaptive Controller joysticks made by Egon . No disassembly required! Please provide feedback if you have any. Assembly/Disassembly Be careful to not put too much strain on the arm…
Another remix of the brilliant Competition Pro Joystick by maciek717 . This one does not suffer from the deformation other remixes have. I am using these uxcell Rubber Strain Relief Cord Boot Protector Sleeve Hose 34x9x6mm 10pcs that I…
Knob axis modified for joystick with attack 2 mm Category: 3D Printing
El joystick es recomendable imprimirlo con el material plástico PETG y para el módulo elástico TPU. El diseño se realizó con Blender, Fusion y Meshmixer. Al joystick se le pueden acoplar tiras de velcro para mejorar el agarre. En el…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more stability, add 5 first layers, 4 perimeters and infill 30% Put “Hilbert Curve” No support is needed Materials recommended : PLA or…
Everything you need to 3D print your Arcade joystick... Except for one thing - 4x Micro switches (~28x16mm) per joystick. Obviously, the higher the infill and stronger the material you use will help with their durability, I print with PLA…
this is for the control button on the mercedes w212, made with a 2mm center hole for thread
For those who can't print tpu material, I provided half-cut model, print two of them and use a Oring to held them together like photo above.
Enclosures for buttons and a joystick controller. Place the buttons and the joystick controller in different locations. Additional material: EG STARTS Joystick controller (…
My personal twin-stick arcade controller, designed to play classic and modern twin-stick shooter games. A large format printer with a build surface of at least 400mm length is required. See this page on my blog for model details:…
Extension for Virpil (or similar) HOTAS designed for maximum space inside and easy printing. Uploaded extension has height of 150 mm and offset of 10 mm, but Fusion 360 files with parameters defined are available to print one at desired…
What : Tiny end-caps to place on M4x5 grub screws, which then serve as miniature joysticks for drone controller. Why : Faster setup for quick drone flights, by skipping the part where you screw in the joysticks. These obviously don't…
Update: Added ML_12mm.STL for two layers and ML_24mm.STL for a single layer. --- This is the first of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and three of the push buttons from my Arcade…
Joystick und Displayschutz für den DJI Mavic 2 Controller mit breiteren "Daumenknüppel". Hier der Link zu den "Daumenknüppeln": https://www.amazon.de/dp/B07HFZH85W/ref=cm_sw_em_r_mt_dp_U_eISuEbX0FJ2WJ…
I wanted to mount my joystick and throttle stick hanging upside down under a shelf to save some desk space, and I have found a nice way to achieve it using 3D printing, few screws and a bit of glue. All my tests went far better than…
Firstly, if you want an arcade joystick mechanism more fit for an arcade control panel then click on this link: https://www.printables.com/model/987973-arcade-joystick-mechanism-version-3 That's my Arcade Joystick Mechanism - Version 3,…
Guilikit joystick replacements are too overpriced, so I've made this adapter to use with any Switch aftermarket covers.
I needed a rough model of the Arduino joystick modula for a project, so i made one. Includes all relevent information to model around
small part that should reduce the risk of damaging joystick when traveling. Compatible with xbox one/series controllers
Slip-on dust shield for the Thrustmaster AVA Joystick Mount to help keep dust out of the gimbal area. It covers the entire gimbal when joystick is centered and easily moves with it. It's about as trivial as an uploaded model can be, but…
As a kid of the 70s, I enjoyed playing games on Atari 2600 and Atari 800 computer systems using the joysticks that came with the 2600 systems. Fast forward to now with Retropie and emulators, I wanted the real game experience with the…
A good friend of mine recently designed a replacement stick for the old Atari 2600 game console controller. https://www.printables.com/model/1033596-atari-2600-joystick-insert-upgrade The rubber boot for my old controller was in extremely…
**3D Printed Nintendo Switch Joy-Con Guard** - Custom-fitted shield for Joy-Cons - Protects analog sticks from damage - Minimal weight addition; easy installation - Printed out of TPU Note: Designed only to be printed out of flexible…
Modeled this in 2 pieces, so it can be printed in 2 colors and the button can be pressed into the model. This can be printed without supports Print instructions Unassociated tags: video game Category: Props
UPDATE NOV 17 2024: Apparently Seeed makes a whole bunch of XIAO boards now. When I made this project, there were only two options. Unfortunately if you buy certain ones, they won't be compatible . I recommend the SAMD21 or RP2040…
This is a novel design for a printable joystick bipod that utilizes compliant mechanisms (flextures) for movement control. Design The mechanical design of the flexture allows for fine grain control of vertical and horizontal movement via…
This model is a plug to keep the user from changing the switch on the back of the Logitech F310. If this switch is in the wrong position the Gizmo system will not work. Installation instructions are located here .
A simple case for the Monster Joystick 9 Pin Joystick to USB Adapter I use 3mm wood screws to secure the top and bottom Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.28 Category:…
This is a replacement set of joysticks made for the RadioMaster Boxer radio transmitter. It is recommended that you print from TPU (I used 95A because that's what I had). I also would recommend inserting threaded inserts. It would…
Coaster set for Ken Mills' Atari Joystick - NO AMS I wanted to have some cool retro gadget in my gaming room, that is when I've found Ken Mills' Atari Joystick ring holder:…
Not quite done with the Multi-Layered Joysticks yet, here is The Multi-Layered Arcade Joystick - Black Gold edition with a choice of 10 or 8 button layouts. The buttons and joystick included with this design can also be found as part of…
This extension is a little under 50mm tall, bring the stick forward by 33mm and tilts it 10 degree forward. There is a version of the extension with and one without access hole that may help if you have a thick/long connector. Also…
This model is designed to store the joystick for VR helmet Pico 4 (pro/ultra) in a horizontal position on a table. Features: There are 4 holes for storing batteries and weighting. Groove for leg trackers Groove for adhesive tape Hooks for…
Change 09.02.2025 Putted in a new version! For my own use I have designed a mounting device for my flight sim joystick. I use a Thustmaster TCA Sidestick Airbus Edition. The joystick table mount is made of eight printed parts needed…
If you have both the MH16 and the MA3X joysticks from MOZA and don't want to leave them on all the time, I've designed a little stand to display them on. Print flat side down. The MA3X will be a little loose, but doesn't really worry me…
Updated version 2 included room for heated inserts, updated the clearing for the joystick. 8x 28mm buttons and 2x 25mm
DIY 3D Printable Flight SIM Yoke Kit (Inspired By Boeing 737 Yoke). Please note that this model is not a 1:1 scale of the original Boeing yoke. The axes are based on potentiometers. 10x buttons. Can be connected by USB joystick board.…
2 caps for the Sanwa 8YT joystick lever The cap is used to not see the screws that connect the joystick to the dashboard. The STL file is simple while the STEP file has the Commodore logo, possibility of printing it with different colors
I printed this replacement part in PETG. This first step is necessary to encapsulate the replacement part: I removed the damaged plastic from the top of the joystick, leaving only the joystick stem, which I sanded down to form a perfect…
Español: Este diseño está pensado para poder fabricar de forma muy económica un joystick que conectado al ordenador, funcione como un ratón. Ideado para aquellas personas que por sus problemas motóricos no puedan utilizar un ratón…
I designed this cover mainly due to how quickly the flat black color of the retractable mount became grungy looking. It’s also a fun way to add a little bit of color to the chair. This cover will work with the retractable joystick arm…
Joystick strain relief for 3rd party replacement ports that don't have this feature to replace the original one found on the SEGA Master System II, that replicates the original design that screws into the board. For full details on how I…
This is a 51mm Coffee Tamper modelled in the style of an Old School 8bit/16bit joystick. I wouldn't want to say which one, but Can you guess? Can be printed in your AMS or as a single colour (like I did cause I didn't have any colours…
Keanu Reeves Detailed fan art replia of Cyberpunk Silverhand controller real-size. Please look at the pictures in order to see details and how it is assembled. This model comes with three STL: -Hand -Arm -Base Keanu Reeves Réplica fan art…
Hi guys! Well, clearly I should have uploaded this design a long time ago , but you know how it is, you chase time, then it passes, then you forget... But the controller contest made me think about it again and I hope it will be useful to…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
This is part of my Steam Deck travel kit: a clip on stand compatible with my rugged back case and my screen and joystick protector found here: https://www.printables.com/model/1103273-slim-steam-deck-cover Printed on a Ender 3 with the…
Warthog Joystick Mount for the Ikea poäng Chair. The Mount should fit very tightly on the Armrest. Screws needed: 4pcs M4x15 4pcs M3x40 with m3 nuts
Firstly, Version 3 is still the best balanced option for your control panel and uses standard arcade micro switches. Version 4 Slimline also uses the standard arcade switches but has a lot looser feel (big deadzone) and would be great as…
I couldn't fit the full case on my printer (Anet A8) and had lots of parts made already. I didn't want to scale and reprint, so I decided to make this standalone stand. Category: Toys & Games
It is recommended to print this with a brim with at least 4mm of brim to give better bed adhesion. IMPORTANT: This extender fits well on 18mm diameter joysticks, so if you have a joystick bigger or smaller that that you will have to scale…
I'ts easy to print joystick. You can useit for flight simulators. 0.16 20% No support need
