Joystick Magnet Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print joystick fidget toy with magnets giving a nice joystick feeling.
- Rating
- 5 / 5
- Likes
- 95
- Downloads
- 377
- Makes
- 2
- Views
- 2,838
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Simple to print joystick fidget toy using magnets, print the 3 parts, install the magnets, and snap the parts together.
Printing
This model is small and requires to be printed accurately to work as expected.
- Material: PLA, PETG
- Layer height: 0.20mm
- Infill: 15% (10% would also work)
- Supports: no
- Perimeters: 2
- 5mm Brim for the ball (see plate layout)
- Print time approx. 25 min. on Bambu X1C
Assembly
When assembling, press fit the magnets into the ball and bottom case first. Make sure magnets are oriented to attract each other. If the magnets are loose, glue them in.
The top and bottom pieces snap together. These snaps are very tight, so they may require some force to work. This is to make them a one time snap part that doesn't need any glue.
Magnets? Where?
This toy uses 2 magnets.
- 8x8mm magnets: https://www.amazon.de/gp/product/B01N2YFXT9
- 5x5mm magnets: https://www.amazon.de/gp/product/B00IQUJPY8
_____________________
This design took inspiration from https://www.printables.com/model/276901-joy-fidget and https://www.printables.com/model/368672-joy-fidget
It was made from complete scratch.