Featherweight Tracker Pod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand alone pods for safely adding a featherweight tracker to your rocket.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 1124
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Featherweight GPS tracker pod
Simple enclosure that allows you to to put your Featherweight GPS tracker into payloads easily.
The Pod actually slides into a BT-55 tube as well if need be.
A 4-40 threaded rod slides easily through a mostly center hole, allowing you to hold the pod together and attach it to shock cords.
You can easily activate / deactivate the tracker by pushing an unbent paperclip through the opening in the base. Even though the LEDs are bright enough to shine through most prints, there is a portal allowing you to easily view them.
UPDATE: Chamber for a USB Charger.
If you're like me, you like to keep your battery topped off but don't want to fully pull this apart to charge it. So I added a small chamber where you can carry a Type-c USB 5V 1A 18650 Lithium Battery Charger Module
I wired the charger inline with the battery. You could possibly develop a plug system for it but I thought that was overkill.
