Half-Curve Segment | New Bright Wintersville Express S Gauge (1:64) Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Half-length 30° curved track segment compatible with New Bright S scale (1:64) Christmas train sets
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a replacement half-length curved track segment that connects with the Wintersville/Dickensville/Western Express train sets made by New Bright in the late 80s and early 90s. It's fully compatible with the original track system and with itself, so you can print multiple and they will connect.
This particular model is a 30° curved segment. Two of these, when connected together, will make the same curve shape as the original 60° curves included with the train sets. This shorter curve is due to the fact that the original 60° curve is too large for the average sized 3D printer to handle.
Compatible with any of the track included with these train sets, and aims to be as similar as possible to the original track.
This model needs to be printed with supports under the rails and end connectors but you'll need to block supports on the inside of the end connectors. (The connectors come out fine without interior supports)
I have a YouTube video showcasing the straight track segments that I previously released here: