1 / 6
Kingston Brass Victorian Toilet Paper Holder Extender — zdjęcie 1
1 / 6

Kingston Brass Victorian Toilet Paper Holder Extender

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extension for the Kingston Brass BA1118SN Victorian Toilet Paper Holder so it can hold mega sized rolls

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a very specific solution to a very specific toilet paper holder. This model was designed for the Kingston Brass BA1118SN Victorian Toilet Paper Holder, but it should work with any of the BA1118 models, as well as with other Kingston Brass items (ymmv).  I printed it in PETG since it was going into a bathroom and also because I needed a colder white compared to what I had in PLA.

Important note:  I had to replace the bolt that came with the toilet paper holder with a longer version in order to extend through the printed piece and connect to the rod holder.  I specifically bought 3/8-16 x 2-1/2" allen button head bolts, replacing the existing 1-1/2" ones.

Print settings I used:
0.2mm layer height
3 wall layers
5 top and bottom layers (1mm)
50% infill (likely overkill)
Supports: on
Material: Rapid PETG (Elegoo)

Tagi