Kingston Brass Victorian Toilet Paper Holder Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extension for the Kingston Brass BA1118SN Victorian Toilet Paper Holder so it can hold mega sized rolls
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very specific solution to a very specific toilet paper holder. This model was designed for the Kingston Brass BA1118SN Victorian Toilet Paper Holder, but it should work with any of the BA1118 models, as well as with other Kingston Brass items (ymmv). I printed it in PETG since it was going into a bathroom and also because I needed a colder white compared to what I had in PLA.
Important note: I had to replace the bolt that came with the toilet paper holder with a longer version in order to extend through the printed piece and connect to the rod holder. I specifically bought 3/8-16 x 2-1/2" allen button head bolts, replacing the existing 1-1/2" ones.
Print settings I used:
0.2mm layer height
3 wall layers
5 top and bottom layers (1mm)
50% infill (likely overkill)
Supports: on
Material: Rapid PETG (Elegoo)