Car Parts are Expensive multilevel wall hanging
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variation of previous model but for multicolor, with different levels for parts of the print, and a backing.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Another version of the stripper/car guy wall hanging for the garage, but redesigned for two color printing (via manual filament change ) and with the middle part of the image recessed a little. Print in the orientation shown.
When you slice this model, add a G600 PAUSE (or if using OrcaSlicer, use the facility provided) in the gcode a few layers up from where the center image appears so you can change to a different color of filament then. White background with black image works well. White silk filament background is nice, too (as shown in the photo).
BTW, the one in the photo was printed with too much thickess so the text gets shadpowed in places seen from off angle. The stl file is with reduced thickness to avoid that (and to save filament)