Avent SCD881/26 Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the baby phone Avent SCD881/26 moveable head
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 118
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the babyphone holder I posted earlier. This remix was requested by Gordo in the comments, so I made it with his specifications:
Avent SCD881/26 Baby phone holder
The distance of the mushroom pins is 43,25 mm.
Increased diameter of the base plate.
I added some material to the backside of the hole covers.
To adjust the angle of the babyphone holder an M6 nut and screw is needed. Use an M6x30 screw with a knob from “Nut Knob Generator” bei wstein. I made several different types, when I created a special M6 knob for a music stand. The .stl file there is too big for this mount, but you can create a knob for your self easily!
To make the part easier to print, I removed the mushroom-like pins. They must be glued in but you can print the upper part flat on the printer.
The mount itself can be printed upright with a brim, as shown in the picture.
Update 12/25
As Gordo Stevens requested this remix, he allowed my to use his photo for the title of this part.
The baseplate is available in different width's now. The stl files are accordingly named.
Remix welcome
Feel free to remix the part and use the attached FreeCad Files!