53 modeli
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
New Version that fit all Babyphone Cameras with a standard Camera Thread 1/4-20 UNC Easy to print, no supports, all bolts printable Idea Newly made dad who didn't feel like spending money again for a simple holder and also didn't wanted…
This is a combination of two parts to allow the installation of the maxi cosi see camera on the babyphone holder via the base mount connector .
Halter für das Arenti Babyphone für 20mm breites Bett
Easy to print, no supports, all bolts printable Idea Newly made dad who didn't feel like spending money again for a simple holder and also didn't wanted to drill holes in the wall The parts The clamp base 1x big 20mm bolt, easy turn-able…
In my case I used a “GHB Babyphone 3,2 Zoll Smart Baby Monitor mit TFT LCD Bildschirm". You can easily clip the camera to any corner of the bed.
Simple angle mount for Babyphone Babysense HD S2. No Supports needed, i printed it in PLA. Took around 4.5 Hours on my Elegoon neptune 2s with aweful settings.
I'm not posting design files here, because this is a remix of 247generator's excellent parametric clamp on thingiverse: https://www.thingiverse.com/thing:3075868. For Alecto DVM-64, using wall mounting sockets on camera foot. The angle…
Print as is and enjoy the freedom of mounting the camera the way you like.
Unfortunately, the camera units of the "Philips / Avent" video baby monitors do not have a suitable mount for a tripod. This can be a problem on the go, as there is often no suitable option to set up the camera properly. It would…
Babyphone Cam Clamp Holder for Vava or Fakeme cams. To Clamp the Babyphone cam on everthing. Printed in PLA+, 0.2 Layer height, 4 Walls, 5/5 Layer, Support needed.
Babyphone Halterung Philips Avent 2-Teilig mit einstellbarem Winkel. Zusatzmaterial: M6x25 (Innensechskant) / M6-Mutter Die Klemmplatte hat eine Aussparung von 17mm, kann nach belieben angepasst werden.
Clips to the base of the GHB VB603 camera babyphone and to a 30 mm wide beam. Prints in place on its side without supports with no further assembly required.
This a Babyphone Camera Holder for the Philips Avent (Modell SCD923/26). It can be used to store the babycamand a powerbank, which can be used to power the babycam. Dimensions: Theoretically it can fit any babycam with a stand of 70mm.…
Europlug-Holder for Philips Avent DECT-Babyphone (Modell SCD503/26) The power cable is wound around the drum. The baby monitor is plugged directly into the socket and the cable is organized. Babyphone-Typ:…
This model makes the Philips Avent DECT babyphone transmitter and receiver stand more stable on its ground as they tend to turn over quite easily, especially the transmitter unit with its stiff cable. This model consists of two parts: for…
Adapter mit ¼ Zoll Schraube (ANSI, 0.25 in, ¼-20 UCN, 3B, Rechtsgewinde)
Simple Wall Mount I designed via Tinkercad. Two versions: Camera hangs on M3-Bolts (two M3 Nuts & two M3x20 needed) Camera hangs on printed knobs (Supports needed printing) Tested with SCD620 and SCD843 (there may be more Camera Versions…
This is a mount for GHB Babyphones which can be installed on 90°-angles on babybeds. It was originally designed for 20 mm tubings, often used for mobile babybeds. Turned out, it also works pretty good on square shapes with dimensions in…
Baby Monitor Mount – Multiple Sizes for Different Panel Thicknesses This is an improved version of my original baby monitor mount, now available in a variety of sizes to fit different panel thicknesses. The design has been refined to be…
(French description below, description française en bas) Here is a wallmount support for the babyphone Béaba. The camera sit at an angle of 43°. You just have to remove the 4 anti-slip pads and put the camera on the support. The model…
This is a NannyCam Babyphone Holder wich can be mounted at babybeds. Hardware needed: 1 x Screw M12 x 40-70 1 x Wingnut M12 1 x Screw M8 x 30 1 x Nut M8 I used 4 Perimeters and 15% infill.
In principle, a baby monitor is a nice thing. Too bad that Philips decided to remove the belt clip for the current version of their DECT babyphones. So if the baby is sleeping and you want to get some stuff done, you still only have one…
Babyphone cam Holder VAVA, 2 versions: with small and larger Angle forward for better visibility. Printed in Pla+, 0.2 Layer height, 5/5 layers, 4 Walls, without support.
An alternative baby phone bed mount for the baby phone Philips Avent SCD845/26: The holder can be mounted anywhere on the side of the baby bed. In addition to the two parts, you need four M3 screws with nuts. Suitable for baby beds with…
Da unser Nachwuchs gerne mal bei Oma und Opa schläft, müssen wir schnell und einfach die Kamera des Babyphones mitnehmen können. Daher habe ich hier eine Halterung designed, in die einfach der Standfuß der Kamera geschoben wird. Die…
Um unser Babyphone nicht horizontal an der Wand montieren zu müssen, - da sonst das Bild verzerrt ist - habe ich diese einfache Halterung entworfen. Sie lässt sich mit Klebeband oder einem Nagel an der Wand befestigen und hat eine…
Compatibility The clamp was designed with the Philips Avent babyphone in mind but it might also work for other babyphones. Attaching the babyphone The idea is to attach the babyphone on the round plate either with rubber bands or…
This is a remix of https://www.printables.com/model/345898-adapter-stativ-babyphone-boifun/files. I removed exactly 4,5cm to make it match this babyphone: https://amzn.to/4eEdj3d
Motorola MBP482 kamera wand halterung
This is a very simple mount for the philips avent babyphone. I recommend tree supports. I tried to design this wihtout the need for support but couldn't do it.
l'écartement entre les pattes est de 18mm le tout est tenu avec du double face.
The stand of our Babyphone broke so I thought it might be a good idea to buy a 3D Printer and Design a new Stand which I created. Very simple Design no support needed
Philips Babyphone Honeycomb mount Design by R_vdk Application / Functions As I like to create while my little one (as well as my wife) are asleep, I needed a mount for the babyphone, as often I would kick it to the ground by accident.…
As i was annoyed plugging the USB-C cable into the monitor i designed this charging dock. You can use the USB-C cable which comes with the set. It is designed to hold the 5'' monitor of the BOIFUN Babyphone 6T . As the weight of the base…
So the Mount for the GHB Babyphone broke and I decided to model it and print it myself. Repairing the Babyphone for my wife and my babygirl but also learning how to 3d design in the process. Print with very fine layer height to get…
Attach your Philips Avent baby monitor video phone without drilling or gluing. Simply clip it behind the switch cover. Suitable for the LS switch program of the manufacturer Jung. Installation in just a few minutes. Easy installation and…
This custom 3D printed adapter is designed specifically for the Philips Avent SCD845/26 baby monitor. It securely clips onto 20mm thick boards or shelves, making it ideal for quick and tool-free mounting in baby rooms, bedrooms, or…
# Babysense HD S2 Stand / Mount Extension (100mm) (Deutsche Beschreibung unten) This is a custom-designed stand for the Babysense HD S2 baby monitor camera. It raises the camera by 100 mm (10 cm) to provide a significantly better viewing…
Wall Mount. Just use whatever M3 screws you have for fixing the babyphone to the mount
Halter zum befestigen eines Babyphones am Babybett
VTech Babyphone Halter ca. 19-21mm
Dies ist eine Kamerahalterung für das Babyphone von Moonybaby für das Tweeto 7 in 1 Baby/Kinderbett. Es empfielt sich mit mindestens 3 Außenwänden und 15% Infill zu drucken, da sonst die Halterung leicht brechen kann. Auf den geraden…
Printed in matte PLA, needs supports.
Fits the wonderful camera mounting system from @kev3d_98719 . See the original models for the other needed files. Needs the short screw and a mount for your specific baby phone camera. (for example also compatible with the one from…
Attach your Philips Avent baby monitor video phone without drilling or gluing. Simply clip it behind the switch cover. Suitable for the LS switch program of the manufacturer Jung. Installation in just a few minutes. Easy installation and…
This is a very simple mount for the philips avent babyphone. I recommend tree supports. I tried to design this wihtout the need for support but couldn't do it.
# Babysense HD S2 Stand / Mount Extension (100mm) (Deutsche Beschreibung unten) This is a custom-designed stand for the Babysense HD S2 baby monitor camera. It raises the camera by 100 mm (10 cm) to provide a significantly better viewing…
Clips to the base of the GHB VB603 camera babyphone and to a 30 mm wide beam. Prints in place on its side without supports with no further assembly required.
Fits the wonderful camera mounting system from @kev3d_98719 . See the original models for the other needed files. Needs the short screw and a mount for your specific baby phone camera. (for example also compatible with the one from…
First of all, thank you eglobetrotter for your awesome design! I remixed his work to fit the new Philips Avent Connected SCD921/26 camera. I printed everything (in Prusament PETG Urban Grey - PLA is fine) with 3 perimeters on my Prusa i3…
