1 / 4
Babyphone Clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-to-print babyphone bracket that clamps onto bed frames, baby strollers etc. Clamping length: 12-30 mm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compatibility
The clamp was designed with the Philips Avent babyphone in mind but it might also work for other babyphones.
Attaching the babyphone
The idea is to attach the babyphone on the round plate either with rubber bands or double-sided tape.
Notes regarding the screw model
There are two models for the M20 screw: the “low tolerance" should work fine for most printers and filaments. If for some reason it doesn't fit try using the “high tolerance” version.
Recommended print settings
- PLA works absolutely fine for this application. The pictures show prints with AzureFilm Silk Dark Copper.
- 0.2mm layer height (screw and bracket)
- At least 3 perimeters
- No supports needed (faces with the embossed logo are facing the print bed)