VNM wheelbase to Simucube 2 QR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter I made to mount a Bavarian Simtec wheel with a Simucube QR to my VNM Elite wheelbase
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter I made to mount a Bavarian Simtec wheel with a Simucube QR with pin to my VNM Elite wheelbase. I didn't want to move stuff around to get the same clearance that I had with my Simucube base so this worked great. It is a very snug fit and, depending on your printing materials, might require a slight drilling of the pin hole (~less than half a mm) to get the pin through. Better too small than too big because it has zero wiggle. You will need to recenter your wheel in VNM software because it is slightly rotated from the default position. Recommend printing 100% infill in a very durable material like PAHT-CF.