1 / 1
Fan shroud for ConnectX-6 Dx and ConnectX-5 — zdjęcie 1

Fan shroud for ConnectX-6 Dx and ConnectX-5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fan mount for cooling a ConnectX-6 Dx or ConnectX-5 using a 5015 fan

Ocena
5 / 5
Polubienia
2
Pobrania
58
Wydruki
0
Wyświetlenia
319
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

ConnectX card are designed for the high airflow levels in servers and will often overheat when used in a typical desktop machine unless fans are added to directly cool the card. This print provides a cooling shroud that uses a standard 5015 fan and (mostly) fits within a half-height full-length single PCIe slot. The shroud fits the ConnectX-5 CX516A, Dell ConnectX-5 071C1T, and the ConnectX-6 MCX623106A cards, and may fit others with similar hole spacing and heat sink placement.

In addition to the print, you will need four 20mm M3 screws, four M3 nuts, and a 5015 fan (I used a 12V 5015 fan and replaced the JST power connector with a standard PC 4-pin fan connector). Assembly just requires using the M3 screws and bolts to attach the network card and fan to the shroud (as shown in the picture).