Fan shroud for ConnectX-6 Dx and ConnectX-5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fan mount for cooling a ConnectX-6 Dx or ConnectX-5 using a 5015 fan
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 58
- Makes
- 0
- Views
- 319
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
ConnectX card are designed for the high airflow levels in servers and will often overheat when used in a typical desktop machine unless fans are added to directly cool the card. This print provides a cooling shroud that uses a standard 5015 fan and (mostly) fits within a half-height full-length single PCIe slot. The shroud fits the ConnectX-5 CX516A, Dell ConnectX-5 071C1T, and the ConnectX-6 MCX623106A cards, and may fit others with similar hole spacing and heat sink placement.
In addition to the print, you will need four 20mm M3 screws, four M3 nuts, and a 5015 fan (I used a 12V 5015 fan and replaced the JST power connector with a standard PC 4-pin fan connector). Assembly just requires using the M3 screws and bolts to attach the network card and fan to the shroud (as shown in the picture).