Simple 25ml Measuring Spoon | Large Kitchen Scoop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist 25ml measuring spoon with a hanging hole. Perfect for protein powder, coffee, grains, or detergent. Easy prin
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
BOM: Printed with ROSA3D High Speed PLA Gray
This is a larger version of my straightforward, functional measuring spoon designed to hold approximately 25ml. It's perfect for slightly larger tasks where a standard teaspoon isn't enough. It features the same clean design with large, easy-to-read "25 ml" lettering debossed into the handle.
Key Features:
Clear Labeling: The 25ml volume is clearly marked on the handle so it won't wear off.
Organization: Includes a hole at the end of the handle for hanging on a kitchen hook.
Versatile Use: Great for dosing protein supplements, laundry powder, larger coffee servings, grains, pet food, or bulk spices.
Support-Free: Designed to print flat on the build plate without any supports.
Printing Instructions:
Supports: None required.
Material: PLA is fine for dry goods. PETG or ABS/ASA are recommended for durability and dishwasher resistance (though hand wash is safer for prints).
Layer Height: 0.2mm provides a good finish.
Infill: 15-20% is sufficient.
Food Safety Note: Please remember that standard 3D prints contain micro-crevices where bacteria can grow. For food contact, it is strongly recommended to use the spoon for dry goods only or seal the print with a certified food-safe epoxy.